seat belt beeping

how to stop this annoying beep. does anybody
know how to make it stop?

 

http://www.tacomaworld.com/forum/search.php?searchid=3673061

 

buckle up or search bar. both work marvelously!

 

(a) Driver and front passenger side seat belt buzzers
(1) Turn the ignition switch ON (Procedure A).
(2) Press the ODO/TRIP switch until the odometer displays "ODO".
(3) Turn the ignition switch off.
(4) Turn the ignition switch ON.
(5) Press the ODO/TRIP switch immediately (within 6 seconds) and hold it down for 10 seconds or more.
(6) Continue holding down the ODO/TRIP switch and fasten the driver side seat belt.
(7) Check that the odometer displays either "b-on" or "b-oFF".
(8) Press the ODO/TRIP switch to change the display to "b-oFF".
(9) Turn the ignition switch off.
(10) Turn the ignition switch ON.
(11) Check that no buzzer sounds when the vehicle speed is 20 km/h (12 mph) or more (Procedure B).
(b) Front passenger side seat belt buzzer
(1) Turn the ignition switch ON (Procedure A).
(2) Press the ODO/TRIP switch until the odometer displays "ODO".
(3) Turn the ignition switch off.
(4) Turn the ignition switch ON.
(5) Sit in the front passenger seat. Press the ODO/TRIP switch immediately (within 6 seconds) and hold it down for 10 seconds or more.
(6) Sit in the front passenger seat. Continue holding down the ODO/TRIP switch and fasten the front passenger side seat belt.
(7) Check that the odometer displays either "b-on" or "b-oFF".
(8) Press the ODO/TRIP switch to change the display to "b-oFF".
(9) Turn the ignition switch off.
(10) Turn the ignition switch ON.
(11) Check that no buzzer sounds when the vehicle speed is 20 km/h (12 mph) or more (Procedure B).