Which Are The Switch Dimmer Wires? (pic included)

I just installed the heated mirrors mod and have the factory heated switch from a 2003 Highlander which can be used for the mod.

I want to tie in the dimmer control/lighting into the new switch from the wires on the adjacent switch but not sure which wires on the adjacent switch are responsible for the dimmer. I know which posts to tie into for the Highlander switch.

I have a 2010 Tacoma.

Can anyone let me know from the picture below which wires are responsible for the dimmer? (ignore the yellow ones tied together with tape - these are connected to the 2 dimmer control posts on the Highlander switch)

 

For the illumination and dimmer, it should be the solid green and the green/white stripe. Those two wires are the same as when installing the illuminated 4x4 switch and tapping into the AC wiring harness. Maybe someone else can verify this as I'm not an electrical genius, but i'm pretty sure that's it....

 

Thanks man - does anyone else have any info they could provide?

 

Thanks CVERNEAU and caribe - I'll try it tonight!