|
|
#1 |
|
Who is John Galt?
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
Overhead Console Fix
I just made this fix today but couldn't find any info here on it. Figured we needed one that people can reference before resorting to the dealership or junkyard for a replacement that will probably do the same thing.
Credit goes to McMixMaster on TN for the pics. I forgot to take them when I did this fix. Problem: Overhead Compass/Temp Doesn't Work Tools Needed: Philips, torx bits, soldering iron, solder Steps to Fix: 1. Open sunglass holder 2. Remove screw holding console to ceiling 3. Grip and pull down on the front (windshield-end) of the console. It will take a bit of pressure for the clips to release. 4. Unplug electrical harnesses 5. Ensure the you still have 2 metal clips attached. If not, the missing one will be laying in/next to the clip-hole. ![]() 6. Remove the 3 Torx screws holding the display/board ![]() 7. Unclip the plasic cover from the board. Be careful. They break easily. 8. Locate the '510' resistors and look for disconnection. Mine was very easy to see. ![]() 9. Press down resistor and solder broken end. I chose to solder both ends of both 510s to make sure I won't be back in there. ![]() 10. Reassemble. It may be worth testing before you snap the clips back into place. ![]() Overall its a VERY easy fix that can be done by just about anyone. 20 minutes & $.10 of solder is better than the $900 that Toyota wants. Feel free to ask if you have any questions...
__________________
No TV and no beer makes Rich go something-something. ![]() Operation First Response Is Part Of The Combined Federal Campaign!! CFC# is 15385
|
|
|
|
#2 |
|
I dub thee malicious!
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Name: Mark the poo flinger
Joined: Jan 2007, #643
Location: San Antonio, TX
Age: 28
Gender: Guy
Posts: 7,155
|
Excellent post!
__________________
San Antonio October 2009 Wrench Meet...
Upcoming TacomaWorld.com TEXAS Region: Texas Offroading Meet, November 20-22, |
|
|
|
#3 |
|
Not Chris4x4'd... yet.
![]() ![]() ![]() ![]() ![]() ![]() ![]() |
Awesome, needs to be added to the mod list thread for 2nd gens...
__________________
"O pitiful shadow bound in darkness, looking down upon others and causing them pain, a soul drowned in sinful karma... Want to try dying this once?" — Enma Ai. (Jikogu Shoujo) ![]() TW AZ - Butcher Jones Cleanup Crew (Saturday, December 12th) |
|
|
|
#5 | |
|
Who is John Galt?
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
Quote:
![]() http://www.tacomaworld.com/forum/2nd...mods-more.html
__________________
No TV and no beer makes Rich go something-something. ![]() Operation First Response Is Part Of The Combined Federal Campaign!! CFC# is 15385
|
|
|
|
|
#6 |
|
Senior Member
![]() |
Thanks for the tip (for when I need it)
|
|
|
|
#7 |
|
Member
![]() |
Awesome write-up Rich!
I have to do the same to mine. The temp reading really comes in handy when it gets around freezing temps with slick roads. |
|
|
|
#8 |
|
pffft
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
Hey oxy, mine has the burn mark on the LCD display like COPPERT's pic in the other thread but when i tear everything down and look at the board, all the resistors look fine
__________________
|
|
|
|
#9 |
|
Who is John Galt?
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
May be worth a shot to try soldering them anyway. What's the worst that can happen? You'll break an already broken board...
Whoever made the displays for Toyota really dropped the ball...
__________________
No TV and no beer makes Rich go something-something. ![]() Operation First Response Is Part Of The Combined Federal Campaign!! CFC# is 15385
|
|
|
|
#10 |
|
pffft
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
Good point. I'll give it a shot next time i feel like takin it apart again
__________________
|
|
|
|
#11 |
|
Member
![]() |
WORKED FOR ME!!
Sure enough, the 510 on the left wasn't connected fully. Quick solder job and it works like new. Many thanks Rich, looks like I owe you a beer at the next meet-n-greet. |
|
|
|
#12 |
|
Member
![]() |
|
|
|
|
#13 |
|
Member
![]() |
|
|
|
|
#14 | |
|
Who is John Galt?
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
Quote:
![]() But I won't argue on a free beer
__________________
No TV and no beer makes Rich go something-something. ![]() Operation First Response Is Part Of The Combined Federal Campaign!! CFC# is 15385
|
|
|
|
|
#15 |
|
vv little ed vv
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
great fix!
|
|
|
|
#16 |
|
Junior Member
![]() |
Sweet!!!
OK, So I read the post and thought, "That's my exact problem!" Well, then I opened it up and didn't see anything wrong with my solder connections. I could not see any cracks or issues, but like other posters figured worst case I could try and if it didn't work I had lost nothing.
And.... IT WORKED!!! While my soldering looks like crap, the connections are now solid and if it stops working, I'll have someone who is talented at soldering redo that job for a more permanent solution. THANKS FOR SAVING ME AROUND $1100!!!!!! |
|
|
|
#17 |
|
Who is John Galt?
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
Glad we could help
__________________
No TV and no beer makes Rich go something-something. ![]() Operation First Response Is Part Of The Combined Federal Campaign!! CFC# is 15385
|
|
|
|
#18 |
|
I dub thee malicious!
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Name: Mark the poo flinger
Joined: Jan 2007, #643
Location: San Antonio, TX
Age: 28
Gender: Guy
Posts: 7,155
|
This thread has been officially made a STICKY!
__________________
San Antonio October 2009 Wrench Meet...
Upcoming TacomaWorld.com TEXAS Region: Texas Offroading Meet, November 20-22, |
|
|
|
#19 |
|
Member
![]() |
added
can one of these be easily added to a model w/o them originally? If so and I got one from a junkyard what all would it take to install?
|
|
|
|
#20 | |
|
Who is John Galt?
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
Quote:
Take the console you have down and see if you have 2 harnesses in the liner. 1 will be for the lights and the other for the temp/compass... Good luck
__________________
No TV and no beer makes Rich go something-something. ![]() Operation First Response Is Part Of The Combined Federal Campaign!! CFC# is 15385
|
|
|
![]() |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Overhead console ideas? | StompinStu | 2nd Gen. Tacomas | 15 | 10-27-2009 12:50 PM |
| Overhead Console | warchi81 | 2nd Gen. Tacomas | 14 | 09-26-2008 03:14 PM |
| Overhead console | Ace | 2nd Gen. Tacomas | 4 | 08-29-2008 08:31 AM |
| Overhead Console and Clock Lights Too Dim | TDE | Technical Chat | 7 | 07-13-2008 04:32 PM |
| WTB overhead console | Dcrooks84 | Buy / Sell / Trade | 1 | 03-26-2008 09:40 AM |