2nd Gen Taco 4Runner Heated, Turn Signal, Approach lighting! & Power Fold? YES! (WIP)

Ditto, what is ACC? Also the green wires from the switch that say.."to unused plug" what does that mean (what unused plug)?

QUOTE=mhagie;4348881]Do these mirrors have the power fold feature?
I notice that the picture with the wires sticking out the colors don't match the decsription of the wires that are pulled into cab.
What relay was used?
In the diagram is shows the ACC with add aline fuse panel, what is that?
Very interested in this mod for sure, your night pic is awesome, the courtesy light is great.

Merle[/QUOTE]

 

subd

 

If I didn't have turn signal mirrors already I would totally go for this

 

Line up a buyer, buy the t4r mirrors and get this done!

 

Will do

 

Then upgrade the courtesy lighting with projectors and halos' :giggle:

 

If I buy the 4Runner mirror assemblies alone, will my sport mirror wiring plug up or still require modification?

 

The hardest parts of this mod..
1) convincing yourself it's not as hard as it seems
2) labelling any and all wires BEFORE cutting anything (even when you think it doesn't matter, just do it)!

 

Accessory power, only on when key is on. behind the switch blanks there are wires for the switches that could go there, you just use the green wires to provide switch illumination

 

tbird. Sorry man. .Just got all the texts. was installing a box today and just finished up. Call me in the am if you still need me.

 

no worries man, i think I got it figured out. Takes me awhile, Benson x was helpful too. Brain farts, when it warms up I'm gonna add another fuse tap to my gauges fuse to get the switch emblem to light up.

 

is it possible to use too many fuse taps? lmao

 

the toyota trucks need 2 wires for the illumination

i believe they are the two light green wires with stripes. i have to stick the multimeter in there again

 

Might as well ask the people in this thread as there might be a different subscriber group...

Does anyone have a pair of the mounting arms from the 2010 4Runner mirrors (Black, Paint Code = 202) that they're not using?

The bolt pattern of my 200*1* 4Runner's mirror mounting bracket does not align with that of the newer mirrors; but I would like a set to tinker with.

Please PM me if you've got a set just sitting around. Thanks!!!

 

hung, anyone ever get those parts to you?

 

Did anyone ever figure out how to get the power folding to work?

 

No. Mounts are different. Would need the whole tree on the side then cut to fit. After, bolts would need to be imbedded for it to bolt up. Thats the abridged version.

 

I never had the T4R or Sienna Towers to check and see if I can direct bolt up. If anyone has access to a set of either, Please test to see if they bolt right up.

 

,THIS ^^^ What is the accessory panel?

 

OP, Just curious what wire size did you run? Other heated mirror threads are using 16 Awg but the factory wires are much smaller..... I'm putting together my shopping list.