Would this work?

I have a blisten 5100 setup on all four sides, 2" rear AAL and eibach front springs. The front has the 1/4 top plate spacers and driver side lean. But can I put a leveling kit on top of the plates to give alittle extra front lift?

 

Does the small 1/4 in spacer for the lean fit under the tophat of the strut assembly or above like the leveling kit does?

I think if under, like sandwiched in with the spring, than no problem at all. If its on top, probably no problem but then it would be two extra pieces on top of the struts and I don't know. Prob no problem as long as you have proper threads to torque it down.

Good luck

 

Instead of the spacers can't you just adjust the 5100s?