2nd Gen Eibach Toytec Gallery thread

The 5100's are designed to work with stock springs on any setting.

With Eibachs, its recommended to go no higher than the .85" setting. This will provide about 2.4". If you pair these with Toytec's top plate spacer kit you can get 3" of lift.

 

If i go with Eibacks and 5100 set at 0" w/ tsb in the rear, will it sit level ? I dont care for any rake.

 

yes

 

Damn these trucks look bitchin.
Im waiting for my bilstein/eibach set up to come today, so pics willl be up soon. I waited to order until the eibachs were back in stock then I got a call saying they were backordered again. Everything else is coming today though.
I upped for the 5160 rear remote rese, has anyone else had experience with them? Worth the extra 190?

 

Roger that. In the interest of science, i think i'll give it a shot and see if the axle shims help. I also have the Wheelers 3 leaf progressive aal coming. Between the two or with some combination, i hope to banish the shutter.

 

I'll post in about a month just ordered my 5100 and eibachs last night!!!!

 

Subd
Add pics in a few days



billys eibach .85 1.5 aal

 

For those of you running Eibachs and 5100 at .85, and the 1/4" spacer for taco lean, are you running stock UCAs without any issues?

 

I'm running the 1/2" drivers side and a 1/4" passenger side with an ARB bumper, stock UCAs, and no problems.

 

Stock UCAs here. I have billies and eibachs at .85 with driver spacer. I would definitely benefit from some new UCAs because my alignment isnt perfect and the truck wonders a little I think.

 

Eiback with Billy's set at .85 and toytec 2" aal 1/4 " spacer. I didn't bother with stock upper control arms and opted for light race

 

Here is a picture:

 

I am going to add some pics later. I have the Eibach springs with the Billies set at .85 and the TSB add aleaf. I just have the 1/4 spacer on the driverside for the taco lean. I would like to add the 1/2 spacers because I have a pretty good rake and I would like to bring ups little. The only problem I am having the alignment. It drives straight and the sho said its in spec but the front wheels have a slight positive camber and the outer edge of the front tires are getting torn up,so what I am saying is the UCA are about maxed out. My next purchase LR UCAs and possibly the 1/2 spacers.

 

I should have read all the post a little better but I am have the same issue with the wondering.

 

This is the best pic I have for now same as my avitar.

 

Updated my post to include updated installed pics.

 

just upped my Eibach/Bilstein combo to .85 in the front and added a 1.5" with TSB in the rear.

 

Nice truck

 

Looks good did you use any of the spacer.

 

Forgot. Added a 1/4" spacer on the driver side