Summit Racing rims help

They are 6 x 5.5 in. Bolt Circle which is what is required...

 

Where did i say anything about the lug pattern being wrong?

 

unless you run lug centric spacers, you need a bigger bore, i run the maxtrac spindles and love them....best mod yet

 

My bad I was thinking the 5.5 was the bore...

 

is there anything i can do to use these

 

The listing says GM hub bore down near the bottom. The GM hub bore is smaller than the Toyotas. The wheels will not seat all the way. You need to check to see if they have the Toyota hub bore. I guess they should be able to be machined out, but that could get expensive. Looks like the same wheel as the Ultra Baja. They generally run about $100, so look around online.

 

You could have the center bore machined out or you could run spacers. If it were me I would sell those and buy wheels that fit.

 

He just bought them.
Have Summit send you a return label for free return shipping since they told you they would fit

 

Or that ^^^^

This is the part number for the same wheel with the proper center bore: http://www.summitracing.com/parts/SUM-185-6883P/

 

that sucks im on a budget and this is a big pain in the ass

Im not really wanting to run spacers i've hurd spacers are not to good to run
any thoughts


thanks guys

 

What size tire are you planning on running?

 

So i have 275 75 r16"s bfg at"s i was going to use those for now but i wanted to do 315"s with maxtrac 4"

 

You are going to need more backspacing or you will be rubbing the UCA.

 

OK .. so I talked to Summit Racing thay were great and i got the right bore and back spacing for about 30$ more...

http://www.summitracing.com/parts/SUM-164-6883P/

these should work with the maxtrac spindles


thanks for everyones help