can you tell me if these alignment numbers are good??

right
-0.1 camber
2.4 caster
0.08 toe
11.8 sai

left
0.1 camber
2.1 caster
0.06 toe
15.7 sai

my pasenger side tire seems to site at a slant ( top facing out) so now i have a noticable wear along the outside of the tire... i got the alignment on 2/11/12 and have not gone offroading since, i have about 5 inches of lift up front with stock ucas.

 

5 inches of lift on stock UCA's ?

 

i have spindles with about 1" of preload, my ucas are about flat

 

Ah so

 

whats spec? take a pic of the sheet they gave u. total camber/caster isnt bad.... but if we put in perspective of specifications it would shed some light on it

 

i couldnt get the pics up, they are all within the specs

 

its fine

 

Ideally, you want:

Camber: 0
Toe: 0
Caster: 2.5

Toe would concern me.

 

your toe sucks

 

should i bring it back in?

 

I would. I actually brought mine in for that today. Camber and toe are wear angles.

 

i got the alignment on 2/11....i wonder if they will do it for free....

 

my before toe was .36 on the right and .33 on the left

 

its very rare u have a vehilce where toe is perferred at 0, are u going to a machine and looking this up?