BILLY!

Ok so im sure this has been asked 1000000000 times, so if someone could post a link you could answer my question without having to do much. just curious... i have billie 5100s all the way around and it looks like 2 extra leafs than stock trd.... whats the max lift i can get out of this and keep my truck semi level. is there anything cheap i can add to get more lift? Im new to this.. Eibach coils maybe?

 

What are your front Billys set to? Stock which is 0, .85, 1.75 or 2.5?

 

how can i tell? would i be able to see those rings like in that picture?

 

also, if i have silver springs around the actual front shocks arent those eibachs? how can i tell?

 

ANYONE??

 

Post some photos and measurements from the center of the hub to the fender.

 

Post pics and we can tell you what the setup is.

 

Alright, i just got around to taking pictures, and it seem that from the center of the hub to the bottom of the fender is about 23 and a 1/4 if that sounds right. unfortunately im unable to attatch the pictures i took :/

 

my dad got out there and helped me look at it, and i compared my spring to the photo provided by Burns, it seems that they are set at 0. i do have a total of 4 leafs in my leaf packs and if im correct stock is 3. so if i wanted to lift up the front end and max out the billies at 2.5, what should i get in the rear to level it out?

 

I might as well contribute something useful, I have a double cab long box with bills at 0 and ome885s which provides 2.5 inches and tsb rear with a single leaf 1.5 inch lift and I still have a little rake. It's hit or miss with lifts, might have to adjust after all is said and settled, part of the game.