Lift/Wheels/Tires

I just pulled the trigger and ordered a 3" Procomp lift, BFG MT KM2 285/70/17 and XD Revolvers. I should be installing everything myself this Saturday. Im pretty excited. I've had my truck for 3 years and have been wanting to lift it since I bought it.

Im going to hold out on the UCAs and see if I really need them. Does anyone recommend that I get anything else as far as the lift goes. Anything that will make the install easier? Am I missing anything? Thanks

 

I also know that I will have to do some cutting (cab mount). My research tells me to do this after the alignment (without UCAs 0.4 camber 0 toe 2.5 caster..correct me if this is wrong). My plan is drive to firestone with my stock tires and wheels after my lift is installed. I will then get them to mount my new wheels and tires and start the alignment process. Any advice would be greatly appreciated. Thanks

 

Bump

 

You'll most likely need the UCA's I have been chasing my tail trying to achieve proper alignment to no avail with that same setup. Best of luck and I look forward to the pictures!

 

i got the cash in hand to get new UCAs. I just want to see if I can get it aligned close to stock without it. Probably going to go with LR UCAs. Did you need a sway bar relocation kit?