New lift!

So I've be running PC 3" lift coils with ES6000 struts up front and a Wheeler's 1.5" 3-piece AAL in the rear. Today I, tentatively, finished my lift upgrade. I went with 2" blocks in the rear, for now(I said tentatively. I will be getting All Pro standards in the future). And Maxtrac 4" spindles up front. Got rid of the PC coil lift and went back to stock TRD coils with Stock Billys. Took me a little over 6 hours by myself. Few pics below.

Here's how she sat before:



Here she is now:



Couple of pics during install:





Wheels stick out a little more now. Love that look!

 

Hope thats not an aluminum lift block. Have heard alot of bad things about those and that doesn't look like it has a taper to it.

 

nice

 

Looks good! What tires?

 

It is. I will be replacing it with a pair of steel ones when I get a chance.

Thanks! I'm running Definity Dakota ATs: LT285/75/16

 

Plans for leafs instead of blocks?

 

I got a set of steel ones Im selling if your interested and they are tapered. Came w my lift. I just installed the all pro leaf pack myself

 

I'm planning on getting All Pro standards.

I saw those, but I'm only looking for 2" blocks. Aren't yours 3"?

 

yes, but if your gonna get the allpro stds they will lift your truck 3" as well

 

looks real good man. Looks way better with the spindles!

 

I'm running 2" blocks with 1.5" AAL.

 

what is a good place to get spindles from? also is your truck 4x4 or 4x2

 

Prerunner(2WD). You can't do spindles on a 4X4. At least none that I know of. You have to go with a coilover lift for 3" max or a full suspension modification including crossmember cutting(Pro Comp, Fab Tech) for a 6" lift.

 

ya i have the 3" coilover. i was asking about the spindles for my friend that isnt part of this site. how much were the allpro leaf pack cost all together?