1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Found Fix For driveline Vibration.

Discussion in '2nd Gen. Tacomas (2005-2015)' started by nate53, Feb 6, 2013.

  1. Feb 6, 2013 at 5:57 PM
    #1
    nate53

    nate53 [OP] New Member

    Joined:
    Feb 6, 2013
    Member:
    #96962
    Messages:
    2
    Gender:
    Male
    Flowery Branch
    Vehicle:
    TRD Offroad 4x4(stock for now)
    I have discovered a fix for the famous driveline vibration when taking off from a stop and from 15-25mph. Place two washers under the center support bearing
    two on each bolt. Then take Three allighnment shims and place them under the leaf springs(front) Three on each side. What you are doing is changing the pinion angle. I did this to my truck and it fixed it. I will get some pictures soon and measurements as well.
     

Products Discussed in

To Top