Not just a body mount chop, but relocated!!

been waiting on an invoice to buy this kit and do a write up on the install for many months. Still willing.

 

Maybe problems with the mount in the floor board not being dimpled for reinforcement dunno

 

As someone who has worked previously in the collision repair business, and has seen thousands of wrecks, and videos on how inertia flows through a vehicle when wrecked.

I feel fairly certain that the OEM cab mount position, doubles as extra bracing to keep the front wheels from severely intruding into the foot well of the truck. With this part moved further back, count your legs and feet crushed should something hit one of those massive wheels, causing them to be pushed back into the door and footwell.

Not trying to be a Debbie Downer, just recommend putting in the work to ensure it safe and legal.

 

*For off road use only. Same way everyone does it from the big boys down to the small shops.

 

16 month bump

 

do people running 35"s encounter rub on the stock body mount there or is that just on tires larger than 35s?

 

oh no. Theres RUB!

 

UMMMM, you need this thread

http://www.tacomaworld.com/forum/2nd-gen-tacomas/285871-2nd-gen-4x4-35s-3-lift-w-o-body-lift.html

 

Its finally alive!!!!!!!!!! Out with the old and in with the new. A friend and fabricator of mine just put in for the first run of 10 sets. Laser cut and bent out of a single piece of 3/16's. Hardware included. I think he's looking at 89.00 + shipping. Just remember these require cutting off the old mount and welding on a new. You also will be required to drill a hole in the floor of your truck for an additional mounting point.

Ive got three of the 10 spoken for already so PM me if your interested.

 

ready.

 

Homer taco yours will be the first shipped. Im hoping by the end of the week (-;

 

PM'd. Been planing on making my own but have not had the time to do it yet.

 

any updates on these?

 

We have 10 sets sitting in the shop now ready to ship. 5 sets are already spoken for. Invoicing will begin tonight, and will ship after payment is received. PM me if you haven't already if your interested.

Ive been working on instructions for the install today.

Cheers

 

Nice. Going to get my frame replaced then chop it at the dealership! LOL - Really piss them off...

 

Im interested in this relocation kit. What all is included? Can you post some pictures of all the parts included? Does it come with the floor board plate? Do you sleeve the extra bolt holes?

 

I wonder y?

 

Because I wanna fit 37's with 3" lift... I got my firewall cleared 3" back at the lowest point and gradually up to 1" back about a foot up toward the end of the pinch weld.

 

If id wanna go anything over 3" I would cough up the $$$ and SAS my taco which is pointless for what I use the truck for.. not to much time as I used to for wheeling and camping but the low stance with 37's would give me high ground clearance and still keep it low enough and practical

 

It comes with both frame mounts, steel plate for the floor, and the hardware. I plan on taking photos of the kit this week. Im really busy with work so Ill be crunched for time.

No sleeve for the extra bolt holes. Ive ran this for almost 2 years and have no issues. The kit now is built a whole lot stronger than the prototype I first ran.