Mike "Wuzzy121". Rest in peace, brother

Go Back   Tacoma World Forums > Tacoma Discussion > 2nd Gen. Tacomas

Notices

How do you remove front bumper.?

Reply
 
Thread Tools Search this Thread
Old 08-09-2013, 04:46 PM   #1
rayado11 [OP] rayado11 is offline
Junior Member
rayado11 is on a distinguished road
Joined: Aug 2013, #110129
Location: San Antonio
Gender: Male
Posts: 4
rayado11's Tacoma Gallery
How do you remove front bumper.?

Pics.?
  Reply With Quote
Old 08-09-2013, 04:48 PM   #2
BroBraBlahBlah
Spoonman is one of the sharper tools in the shedSpoonman is one of the sharper tools in the shedSpoonman is one of the sharper tools in the shedSpoonman is one of the sharper tools in the shedSpoonman is one of the sharper tools in the shedSpoonman is one of the sharper tools in the shedSpoonman is one of the sharper tools in the shedSpoonman is one of the sharper tools in the shedSpoonman is one of the sharper tools in the shedSpoonman is one of the sharper tools in the shedSpoonman is one of the sharper tools in the shed
 
Spoonman's Avatar
Name: Jamie
Joined: Sep 2011, #63328
Location: Calgary
Age: 24
Gender: Male
Posts: 7,178
Spoonman's Tacoma Gallery
Search function. Go look under your truck function.
  Reply With Quote
Old 08-09-2013, 04:56 PM   #3
BroBraBlahBlah
Spoonman is one of the sharper tools in the shedSpoonman is one of the sharper tools in the shedSpoonman is one of the sharper tools in the shedSpoonman is one of the sharper tools in the shedSpoonman is one of the sharper tools in the shedSpoonman is one of the sharper tools in the shedSpoonman is one of the sharper tools in the shedSpoonman is one of the sharper tools in the shedSpoonman is one of the sharper tools in the shedSpoonman is one of the sharper tools in the shedSpoonman is one of the sharper tools in the shed
 
Spoonman's Avatar
Name: Jamie
Joined: Sep 2011, #63328
Location: Calgary
Age: 24
Gender: Male
Posts: 7,178
Spoonman's Tacoma Gallery
Use the search button on the website^^ there's gotta be a how-to somewhere.

Or lay down a mat, and go have a peek under your truck. Couldn't be too complicated
  Reply With Quote
Old 08-09-2013, 04:57 PM   #4
Senior Member
VolcomTacoma2011 is one of the sharper tools in the shedVolcomTacoma2011 is one of the sharper tools in the shedVolcomTacoma2011 is one of the sharper tools in the shedVolcomTacoma2011 is one of the sharper tools in the shedVolcomTacoma2011 is one of the sharper tools in the shedVolcomTacoma2011 is one of the sharper tools in the shedVolcomTacoma2011 is one of the sharper tools in the shedVolcomTacoma2011 is one of the sharper tools in the shedVolcomTacoma2011 is one of the sharper tools in the shedVolcomTacoma2011 is one of the sharper tools in the shedVolcomTacoma2011 is one of the sharper tools in the shed
Navy: Machinist Mate Third Class (Veteran 2011)
Joined: May 2011, #57205
Location: East Bay, NorCal
Age: 29
Gender: Male
Posts: 5,597
VolcomTacoma2011's Tacoma Gallery
^Seriously. It's a couple tabs, and a couple screws ok each side, then it pops off. But do please use the search function on this site. It's there for a reason
  Reply With Quote
Old 08-09-2013, 05:05 PM   #6
rayado11 [OP] rayado11 is offline
Junior Member
rayado11 is on a distinguished road
Joined: Aug 2013, #110129
Location: San Antonio
Gender: Male
Posts: 4
rayado11's Tacoma Gallery
Seriously. No how to remove a front bumper WEIRD.. Just the rear bumper.
  Reply With Quote
Old 08-09-2013, 05:15 PM   #8
Custom Tacoma bumpers & more for your offroad toy
RelentlessTaco is one of the sharper tools in the shedRelentlessTaco is one of the sharper tools in the shedRelentlessTaco is one of the sharper tools in the shedRelentlessTaco is one of the sharper tools in the shedRelentlessTaco is one of the sharper tools in the shedRelentlessTaco is one of the sharper tools in the shedRelentlessTaco is one of the sharper tools in the shedRelentlessTaco is one of the sharper tools in the shedRelentlessTaco is one of the sharper tools in the shedRelentlessTaco is one of the sharper tools in the shedRelentlessTaco is one of the sharper tools in the shed
 
RelentlessTaco's Avatar
Name: Eric
Joined: Feb 2008, #4772
Location: East side of the Sierras(Sparks NV)
Age: 25
Gender: Guy
Posts: 13,176
RelentlessTaco's Tacoma Gallery
Steps to remove front bumper from 05-11:

remove the grille(2 screws, 2 plastic clips by top of radiator) then lift up and it unclips at bottom.
Remove the exposed plastic clips that were under bottom edge of grille holding top of bumper.
Craw under bumper and remove the visible screws(and the one hidden one on each side by the fender flare tip in wheel well, and recessed within small cutout) and the 4 plastic clips off aluminum crush bar.
Next cut off the flat head screw looking clip holding fender liner to bumper fender flare and loosen the fender liners from the bumper cover
Next pull bumper cover outward(away from side of truck) at ends by the fender flare. It will pop free.
The bumper will unclip from that side so next do the same on the other side.
Now there is the aluminum crush bar... remove it by taking off the 6) 14mm nuts holding it to the end of the frame. Done.
  Reply With Quote
Old 08-09-2013, 05:18 PM   #9
rayado11 [OP] rayado11 is offline
Junior Member
rayado11 is on a distinguished road
Joined: Aug 2013, #110129
Location: San Antonio
Gender: Male
Posts: 4
rayado11's Tacoma Gallery
NEVER MIND... I FOUNDED.... NEW TO THIS TACOMA WORLD LOVIN MY TRUCK TOUGH TNK U GUYS
  Reply With Quote
Old 08-09-2013, 05:19 PM   #10
TOYOTA.. Because barbie drives a jeep..
07COMA801 is one of the sharper tools in the shed07COMA801 is one of the sharper tools in the shed07COMA801 is one of the sharper tools in the shed07COMA801 is one of the sharper tools in the shed07COMA801 is one of the sharper tools in the shed07COMA801 is one of the sharper tools in the shed07COMA801 is one of the sharper tools in the shed07COMA801 is one of the sharper tools in the shed07COMA801 is one of the sharper tools in the shed07COMA801 is one of the sharper tools in the shed07COMA801 is one of the sharper tools in the shed
 
07COMA801's Avatar
Name: Kris
Joined: Sep 2012, #87546
Location: salt lake city
Age: 21
Gender: Male
Posts: 856
07COMA801's Tacoma Gallery
Quote:
Originally Posted by RelentlessTaco View Post
Steps to remove front bumper from 05-11:

remove the grille(2 screws, 2 plastic clips by top of radiator) then lift up and it unclips at bottom.
Remove the exposed plastic clips that were under bottom edge of grille holding top of bumper.
Craw under bumper and remove the visible screws(and the one hidden one on each side by the fender flare tip in wheel well, and recessed within small cutout) and the 4 plastic clips off aluminum crush bar.
Next cut off the flat head screw looking clip holding fender liner to bumper fender flare and loosen the fender liners from the bumper cover
Next pull bumper cover outward(away from side of truck) at ends by the fender flare. It will pop free.
The bumper will unclip from that side so next do the same on the other side.
Now there is the aluminum crush bar... remove it by taking off the 6) 14mm nuts holding it to the end of the frame. Done.
This guy ^^ knows whats good!! hah
  Reply With Quote
Old 08-10-2013, 10:18 PM   #11
My boys need a house.
DoorDing is one of the sharper tools in the shedDoorDing is one of the sharper tools in the shedDoorDing is one of the sharper tools in the shedDoorDing is one of the sharper tools in the shedDoorDing is one of the sharper tools in the shedDoorDing is one of the sharper tools in the shedDoorDing is one of the sharper tools in the shedDoorDing is one of the sharper tools in the shedDoorDing is one of the sharper tools in the shedDoorDing is one of the sharper tools in the shedDoorDing is one of the sharper tools in the shed
 
DoorDing's Avatar
Joined: Sep 2012, #86445
Gender: Male
Posts: 14,770
DoorDing's Tacoma Gallery
rayado11, Welcome to TW!

Eric, thanks for being helpful.
  Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar Threads
Thread Thread Starter Forum Replies Last Post
Trade stock 2013 front bumper plus cash for front winch mount off road front bumper corey.blanco Buy / Sell / Trade 2 04-23-2013 10:03 AM
how to remove/replace front bumper 04 DC chris66 1st Gen. Tacomas 3 10-24-2012 02:39 PM
How do you remove the front bumper on a 98-00 4x4? Madjik_Man 1st Gen. Tacomas 23 06-16-2012 10:53 PM
Remove Front Bumper on a 2006 Tacoma tophatchief New Members 3 03-06-2011 03:18 PM
Help! Remove front bumper toyotadude5 2nd Gen. Tacomas 2 02-15-2010 09:18 AM


Copyright © 2014 Tacoma Forum. Tacoma World is not owned by, or affiliated with Toyota Motor Corporation.