285's stock non-tsb 3-leaf rear

Here soon i plan to level my taco and got info from a fellow member that said based on the kit im getting i can fit 285/70/17 with some trimming in the front. Just wondering if the 285's will be fine on a stock 3-leaf rear suspension? Thanks guys.

 

I had 285 16 on mine and cleared the rear with the add a leaf. I'm guessing the 17 should clear as well. somebody should be able to give you better information

 

Thanks man. Hopefully someone will chime in here in a few!

 

I would say not on your stock 3 leaf... You would need an AAL

I guess you could do it but you wouldn't be able to drive over a curb.

Ill leave this here...

http://www.tacomaworld.com/forum/2nd-gen-tacoma-marketplace/291917-fs-rear-5100s-aals-u-bolts.html

 

Mine fits on my stock 3-leaf non tsb. Little bit of room, but doesn't scrub at all. So you should be good to go.

 

Thanks for the info. Figured youd chime in Mr Swank haha. Appreciate it guys. If all else fails i can always get a AAL in the end.