Jumpers LEDs 2013 Tacoma

Pulled the trigger on Jumpers LEDS for my 2013 Tacoma and my 2003 Camry

Picture 1.



Used a small flathead screwdriver to pop out the covers off my map lights.

Picture 2



Picture 3



I used the small flathead to pop out the stock bulbs from the base. Gently!

Popped the new LEDS

Picture 4.



Now to the dome light, used the flathead to pop out the cover and pulled out the bulb.

Picture 5



Picture 6



Popped in the LED

Picture 7



Picture 8



Complete!

 

I did the mod 2 years ago and it's an awesome upgrade compared to the standard yellow bulbs that come OEM with the truck.

 

I agree, they have come in so handy, the light, the ease of installation. I even had one red for my map lights to use while off road at night.

Service and quality, great.

 

Thanks for the great pics, Ramon. Could you provide more detail as to where the "small, flat screwdriver" is applied to do the removal of the cover? I can see the hinges from the back and know the switch is at the opposite edge...but am leery of just prying any place without knowing what I'm doing...don't want to be saddled with broken tabs, etc. I can get a bulb out when the cover is gone, but the cover comes first
Secondly, if you're satisfied with your LED replacement bulbs for that location, where did you get them...what model...what color?

Lots o' questions looking for answers THANKS!

 

I found csjumper2003 is a member on here... That's his signature line and signature I pasted below.


http://www.tacomaworld.com/forum/2nd-gen-tacoma-marketplace/176932-jumpers-leds.html

 

I added two more pictures that show this. Hope it helps.

I bought the white ones

 

Correct

 

Thanks, Guys! The added pics were a large help...I was able to get mine out last night, without damage. Feel much "smarter" now Will go to the Jumper link and check it out.

 

changed dome and map lamps with cool white led's 2 years ago.

awesome !!!!!!!!!!!!!!

 

Good looking write up. Thanks im gonna snag these pics.

 

you're welcome