Originally Posted by Captain Magpie
Jim thanks for the reply! So I believe I have the same setup based off of your link but I have a ?
1. Where does the brown (male pin) plug into
2. The link shows the factory relay being used?
I think I have it figured out but I don't want to melt my elec sys lol....
P.s. What "other" relay did you use?
You remove the grey relay in the picture and slip the brown wire into the slot at the bottom of the relay. Once you pull the gray relay out you will see where it goes. I also put a fuse in the grey wire just to be safe.
I bought an aftermarket relay at autozone
just incase I had a problem. The relay number is 90080-87026, It is an exact replacement.
Alternate Part Number:
Warranty: Limited Lifetime
Xref Brand: Toyota
Xref Part #: 9008087026
OEM TechNote: Multipurpose relay.
CHECK THE FIT
I tried the bent pin mod and used the above relay and I must have screwed up the relay because it did not work. I was happy I was using the aftermarket relay.