CV, Axle, and Wheel Bearing

Hey guys,

My truck just broke 100,000 miles and I have a couple questions.

My passenger side cv boot has a ton of grease coming out of it.
I plan on ordering a new axle for both sides since the driver side looks like it is starting to crack from being dry.

I checked out some of the other posts on here and it looks like a lot of people are having issues with wheel bearings. So I figured that I would replace those while I have everything apart. They seem to be good right now but I just want to make sure they stay good.

I found the threads on how to replace the cv axle and how to replace the wheel bearings. The only thing I am having issues with is finding the right part numbers for all the seals and O-rings.

Does anyone have a list of part numbers of all the seals and O-rings that I should replace if I am going to replace both axles and do wheel bearings on both sides? Preferably aftermarket ones like National because I know OEM ones are super pricy.

 

Anyone have any advice?

 

get new parts for the things mentioned

(this is what is replaced as new when doing it as indicated on TIS)
---
CV joint replace/install

new FRONT AXLE HUB OIL SEAL
new FRONT DRIVE SHAFT DUST COVER
new FRONT DRIVE INNER SHAFT OUTER SHAFT SNAPRING

new outboard joint boot with 2 new
clamps onto the outboard joint shaft.

new FRONT AXLE OUT BOARD JOINT BOOT CLAMP
new inboard joint boot
new FRONT DRIVE INBOARD JOINT ASSEMBLY
install a new snapring.
new FRONT AXLE INBOARD JOINT BOOT CLAMP

-----------
bearing replace/install

new front wheel adjusting nut
new o ring
new front axle hub oil seal
new knuckle grease retainer cap

I don't have part numbers but you can look them up based on the name of part

 

This might help a little.
http://www.tacomaworld.com/forum/2n...s-4x4-sale-complete-best-price-ever-save.html