Will this work? Bilstein 5100 set up

If I get Bilstein Adjustable shocks for all four corners with the front shocks at 0. Then run 885 OME coils with OME Trim Packer for driver side lean. In the rear I'm gonna do Progressive 3 add a leaf. I'm going to be running 285/70/R17 tires. I know I will have to trim regardless, but will this setup work?

 

Yup, that's probably what the majority of lifted trucks here are running, or very similar.

 

You cannot run OME trim packer with 5100s. They are made for OME shocks. You will need a 1/4" top plate.

 

Read this:

http://www.tacomaworld.com/forum/2n...ng-lift-4x4-p-r-tacomas-w-tsb-rear-leafs.html

 

Good catch!

 

Ahh okay! Other than that do you think everything sounds good?

 

yep same setup that's waiting to go on my truck but I got a 1/2 inch top plate spacer

 

Are you gonna be running 285s?

 

Everything else sounds good to me!

 

Yes, I am debating on 285 70 17 or 285 75 17. I plan on doing a CMC on both sides and a lot of trimming and cutting. I might have them mount both and see which looks better.