Will a Nissan Frontier bed divider work with the Tacoma?

There is one listed on craigslist for only $50($80 with extender) which is a steal. The track system looks to be the same. Anybody know?

 

Resurrecting an old post... But I actually have a bed divider from my old Frontier that I'm going to try to make work in my '15 Tacoma. A quick fit test showed that no, "out of the box", it will not fit. It looks like I'll need to drill some new holes in and make new wheels for the bed rails.

The Frontier box appears to be wider and the rails accommodate bigger wheels.

 

IIRC, the Frontier bed track system uses Unistrut, which is slightly different from whats in our trucks.

 

Did anyone get this to work? I found one for 30.00 used. What all will i need to do to make it fit?

 

You need to drill some new holes on the ends to be able to adjust the width of the thing narrow-enough to fit the Tacoma bed and replace the wheels that go into the bed rail/tracks with something smaller that fits the Tacoma tracks.

The Frontier has a wider bed and the bed tracks are larger.

 

That dosent sound to bad. Where would you find smaller wheels?

 

I didn't and ended up selling the divider to free up space in the garage before I ever finished. My plan was to 3D print some but I didn't have the necessary stuff to make them out of nylon like I wanted. In retrospect, I suppose something square that fits in the track might have worked too.