Question

I have a 2005 tachoma 2 wheel drive 135,000 miles on it, never off road, have replsaced left front wheel brg twice, And I think its going again. both times you could feeL MOVEMENT when you raised wheel,and rocked back and forth. This time no movement, no noise at low speed high speed and extra high about 105,no noise vibration no nothing, when turning wheel to the right in a curve you can hear a noise like a train beside you, turn wheel to left in a curve nothing, have had rotated, all different places no results. never replaced brg right side, does any one out there have an input, can replace brg in about 2 hrs but its a pain, my son has a press, note 1st brg at about 54,000 second around 94,450, help would be appreciated thanks Rex Stuart fla

 

Does it have a race in there too. Also are you removing excess material an all grease? That could contain metal.

 

REPLACED BRG AND HUB ASSY NEW SEAL,MADE SURE ALL WAS CLEANED,GREASED, THIS TIME IF IT NEEDS TO BE REPLACED MY SON FOUND A COMPLETE UNIT PRESSED AND READY TO GO, WE WILL GIVE IT A TRY,I WONDER WHY ITS ALWAYS LEFT SIDE, BY THE WAY I AM NOT HOLLOWING CANT GO TO SMALL CASE.

 

Is the wheel turn to full lock?

 

That's an awesome sig pic! Just had to comment ...

 

Lol thanks!

 

YES WHEEL TURNED LOCKED

 

It's your right brging thats bad,
when you turn right your unloading the right brging causing the noise,
when you turn left your loading the right brging, so no noise