For all of you with 3" lifts...

So as you all know…the front is 2" lower than the back from the factory.

Are there any kits that sells the leveling kit+ the 3" lift kit all the way around? (so I guess it would be a 5"/3" lift)

Im new to lift kits but have learned that junk country is a no no.

Anyways, let me know what to do!

 

You can't "stack" lifts which is what you're talking about.

To get the height you're proposing, you want a 6" drop bracket lift such as fabtech or procomp. (It doesn't lift the back a full 6" - more like 3 1/2" or so)

 

So you can't level it out then 3" lift?

 

OP, what is going to be the use of the truck? Off roading? Towing and Hauling? Or just crawling at your local mall?

 

You could do a leveling kit in the front then do a 3" body lift.

However, most folks will recommend against a 3" body lift as potentially unsafe.

That would be a very "ghetto" or "redneck engineering" setup to put on a nearly new 2014 truck. If you want that much height - do a 6" drop bracket lift.

 

lol i am not ghetto or redneck so I guess I pass haha

 

I understand what you're saying, but you wouldn't be interested in 3" up front and 1" in the rear? it would be level then, just not 3: higher in the back. What size tire are you wanting to run?

 

Lots of pix of 6" drop bracket lifted trucks in this thread:

http://www.tacomaworld.com/forum/suspension/43093-fabtech-procomp-6-lift-more-pictures.html

 

do yourself a favor.... leave the rake, its there for a reason... so you dont blind people when you have any sort of load in the truck.... plus bro lean is stupid.

 

How is having a leveled truck considered bro lean?

 

Level unloaded , add load bro

 

duh!