Suspension part needed

I have the adjustable 5100's in the box, and a new set of bushings, and a new pair of TRD Sport front coil springs. Trying to figure out what the top piece I would need to put it all together? Shock mount top I believe. Anyone have a link to that correct part. And I have that part and can all be compressed and put together correct?

 

Use the top plates from the OEM shocks / coils

 

Trying to have it all assembled while my current truck is still together. So anyone have a link

 

So I just realized from a friend one spring has a big yellow and blue on it, and the other one doesn't. Does anyone know which one goes on the Drivers side? These are from a 2010 TRD Sport.

 

http://www.rockauto.com/catalog/moreinfo.php?pk=2997609&cc=3307209 is the shock mount that I need to complete the front coil job

 

You can get the moog setup from Advance Autoparts and it has everything you need to have two complete setups.

Jon

 

Can you link a part number maybe? Just went on the site and could find nothing. Put 2014 in instead of 2015 in case the site wasn't up to date yet. And still no matching products

 

So I found 2 of them on Rock Auto, which one should I get?

$29 SM5640 - Mount Kit

SM5640 KYB looks kind of plastic and cheap.

907921 Monroe strut mount looks all metal

 

Advance auto. Part No: K160266

 

Thanks when I put that number in it states it does not fit my vehicle

 

Hmm. It should work. Maybe someone else will chime in shortly. Also, make sure to search for a coupon, as advance has tons of them that will save you some money.

Jon

 

Thank you though I appreciate it. You would think as much as the conversation of lif is talked bout on this site. More people would chime in and help.

 

Probably because most people would give the same advice Large did.

 

Probably because if people read it correctly, these are extra springs, 5100's, and bushings. ( Trying to have it all assembled while my current truck is still together. ) As quoted above. Wanted to get them all compressed to make it easier to for the person on here that said they would help with the install. So I would just help unhook it all, pop the factory ones out, put the new already compressed assembly in. That's why I am not using the stock top plate.

 

I'll sell you my stock coilovers for cheap and you can vulture the top mounts off of them.

 

Whats cheap?

 

PM'd

 

http://www.partsgeek.com/mmparts/strut_mount/toyota/tacoma.html

and here
http://www.lowrangeoffroad.com/2005...suspension-strut-mount-each-tac-sp-sm-05.html

will work on your taco

 

I guess I don't understand. You're obviously going to swap the front struts out, why not take them all to a shop, pay the $40 and have them assemble them or just do it yourself and rent a spring compressor?

 

Not sure if there's a difference in the 14's but I just bought the Moog set p/n K160266 from Rock Auto for my '08. It has everything and when I finally get my front shocks I can install them and give a review.