height

Hi guys could you please give me a measurment in the front of your truck to see how tall it is after a 3'' lift has been installed mine is 39 and 3/4 running 275-70-17 the front just seems really high thanks to all

 

I have a '09 TRD sport. Stock, the front was 34.5" ground to fender. I lifted 2.5" on coilovers and have 265/70R17 tires (so 1/2" lift from tires). Now I'm at 37.5". Your tires are about 1.5" over stock so 3/4" more ground clearance. 39-3/4" still seems about 2" too high.

 

What are your measureing points?

 

from the floor to the center of the wheel well

 

the truck seems like it is riding in a boat very tippy

 

Well here is mine: Toytec 3" lift 884 coils with Bilstien shocks. 285/70/17 (32.4" tall)

Drivers 38"
Passenger 38-3/4"

 

does it seem to be to tall all i did was 5100s and ome coil 885 with the top spacer

 

how was the ride luk when you got done did it seem tippy to you or did it ride better??

 

yes thats how they come right i mean i didnt move the clip

 

To be honest, I find the ride was pretty much like stock. Just higher. Then I pulled the swaybar. Now she is a little tippy, reminds me of older model chevys.

 

1/2 inch what is your height

 

That is high. Smaller tires and 1" taller than me, on one side, lol.

 

Well I was planning on getting some 886 coils to replace my 884's. But if we are about the same height, i'll just stay.

 

I was told by toytec that it would correct the sag I am seeing. My truck was level after the lift was installed but now has the factory rake back. I called them a few months after I purchased and was informed that they now reccomend the 886 coils for Double cab trucks, but when I purchased my lift the 884's were thought to be ok. I understand the load bearing concept, but thought lifting the front was called for. Now I think the rear may just be a tad too high.

Maybe your bumper is playing a part in the height?

 

makes sence what we were talking about at coal creek, that lift sat at 38 3/4" on drivers side and 39" on passenger when I measured before taking it off last night.

edit: taking a look back, not really that different...

 

Our numbers are very similar.

Thats kinda what I was looking into.
Everyone on Tw was saying 885's but toytec said 884's. Then when I called back they said double cabs were 886. I was like wtf. But hey she wheels fine.

 

pming right now