Cheap/free mods

[kristopherl]

Originally Posted by piercedtiger

I did some research and looks like there's a way to light up the 4x4 switch. Looks like it'll cost around $70 + Shipping.

You need one of these: DIAL-ILLUM - Illuminated 4x4 Dial/Switch fits 2005+ Tacoma 4x4 Parts and Accessories

And then goto:
My 2005 Tacoma Site

You should be able to skip most of the steps in the site above, and go right to wiring up the 2 wires to light up the new dial.

The tacoma site above says to remove the dials to remove the 4wd switch and climate controls. I'm not sure about the 4wd switch, but the climate controls pop out very easily with a butter knife, plastic scraper, etc. Anything with a thin blade that won't scratch the plastic. I've removed mine several times, and there's no need to mess with pulling the dials off.

Looks fairly straight forward:

1. Buy the kit from TRDParts4U (includes illuminated dial and 2 wires to insert into your original 4wd switch harness to contact the power/ground pins for the lights)
2. swap switches
3. plug the two wires in
4. splice into the 2 wires on climate control for powering those lights

You can either solder them to the plug like he did, or use quick splices.

What it should look like when done:


More information here:
Illuminated 4x4 switch - Toyota Forums :: Toyota Nation

GREAT! thanks of the post.. I'm going to have to save this to favorites for future mod... Hate the thought of dropping money an something that should have been that way from the beginning.

I want to do your bedlight mod first. GREAT POST!!!!! Are you happy with the white or do you wish you did a different color?

[piercedtiger]

How many of you hate the ABS system in snow or while offroading on soft/loose terrain? I've had the ABS kick in so many times and almost make things worse on snow and gravel that I almost wish I didn't have it... Or at least had a way to turn it off...

Thanks to a redneck working electrical magic with the USAF in Germany we have a solution! Thanks to Tacogrande on TN again!
LOCKER MOD WRITEUP PAGE 2, VSC/ABS/TRAC/GOVERNOR MOD PAGE 3!

This will only cost a you a new switch, enough wire to run from the ABS ECU to your switch, some zip ties, and some time.

To Clarify some points here: Do NOT cut the wire! Splice into it for the ground! I used the ABS ECU (Passenger side, under hood) wire after talking to Tacogrande to clarify somethings (instead of the 4wd ECU wire I originally posted). I had cut the wires. Once they were reconnected, then grounded it worked.

Here is the wire: (I cut it by mistake instead of using a quick splice, so ignore the shrink tape. It's around the blue w/yellow striped wire.)


I sent the red wire for grounding it (thinner one, thicker one is for my 12v bed outlet) over to the driver side and through the grommet below. I zip tied it along the firewall to keep from touching the engine or exhaust.


I used a blank switch next to the steering wheel and had to trim the hole slightly for my switch to fit. I used a switch with a cover to prevent accidentally turning the ABS off.


The blank was cut down with a dremel so that it was just a face plate to keep the switch from pushing too far into the dash. The hole is tight enough to firmly hold the switch. Just used a pocket knife to trim a little plastic until the switch would push in (took a bit of effort, but you want a tight fit).


Note: This makes it THINK the locker is on so the locker and ABS lights are on. I tested it and it works. I don't have VSC (Vehicle Stability Control) or TRAC (Traction Control), but I'm told they are also turned off. Makes sense since all those get turned off when the locker is on, and this makes the truck think the locker is on (without triggering the actuator).

More information below
Traction Control (ATRAC hack) writeup! - Toyota Forums :: Toyota Nation


Classic example of why you would want the ABS off..
My ABS sucks & the locker rocks! - Toyota Forums :: Toyota Nation

Edit:
This has been more or less completely rewritten since I did it, got confused myself, had to clarify a few things with Tacogrande, and test to verify it works.

aka ABS kill switch (for added search key words)

[piercedtiger]

Originally Posted by kristopherl

GREAT! thanks of the post.. I'm going to have to save this to favorites for future mod... Hate the thought of dropping money an something that should have been that way from the beginning.

I want to do your bedlight mod first. GREAT POST!!!!! Are you happy with the white or do you wish you did a different color?

You're welcome! And I hear you on compensating for Toyota's, uhhhh, "lack of foresight" to be polite...

I love the white! They are very bright, light is evenly distributed (you can see an almost perfect cutoff on the ground with those lights), and work quite well for me. I like being able to turn them on before I get to the truck to see what I'm stepping on first. I thought other colors (red, blue, orange) might not be as bright. And I've tried using colored lights to read things before and the colors mess with your head. Hard to read a map with a red dome light! I figured the bed might become a night workbench while camping or helping someone so I didn't want another color to interfere with things.

Besides, white and amber lights are the only colors legal in NY besides red brake lights, so if I run with them on for whatever reason the cops can't do shit.

[kristopherl]

Originally Posted by piercedtiger

You're welcome! And I hear you on compensating for Toyota's, uhhhh, "lack of foresight" to be polite...

I love the white! They are very bright, light is evenly distributed (you can see an almost perfect cutoff on the ground with those lights), and work quite well for me. I like being able to turn them on before I get to the truck to see what I'm stepping on first. I thought other colors (red, blue, orange) might not be as bright. And I've tried using colored lights to read things before and the colors mess with your head. Hard to read a map with a red dome light! I figured the bed might become a night workbench while camping or helping someone so I didn't want another color to interfere with things.

Besides, white and amber lights are the only colors legal in NY besides red brake lights, so if I run with them on for whatever reason the cops can't do shit.

Yeah, I thought the same thing about the colors not being as bright. Any issues with the vendor?

[piercedtiger]

Originally Posted by kristopherl

Yeah, I thought the same thing about the colors not being as bright. Any issues with the vendor?

Nope! Paid through google checkout, they showed up a week later in their box, box in a thick cardboard tube for shipping. Was a bit like an eBay purchase. Automated emails sent when order received, processed, shipped with tracking number. I got emails from both VMInnovations and Google Checkout.

[kristopherl]

Originally Posted by piercedtiger

Nope! Paid through google checkout, they showed up a week later in their box, box in a thick cardboard tube for shipping. Was a bit like an eBay purchase. Automated emails sent when order received, processed, shipped with tracking number. I got emails from both VMInnovations and Google Checkout.

Can't remember... did you get the ones with the remotes?

[dsds]

Shoot, I wish I had an Offroad instead of the Sport to do the locker mod, abs, VSC stuff detailed earlier.

Here is a mod originally from TRDtoy79.
It is one of my favorites because it's free and clever (only for 2008):

How much are you willing to pay for me to tell you the code that turns the seat belt chime off?

No, I'm not kidding. I have the code and tested it on my '08 Taco.

No takers??? Fine then! Hope you enjoy listening to that endless, annoying seat belt chime.

OK, I give. Here it is. BTW you guys are no fun :

1) Turn the Car 'ON', but do not start the engine (Leave your foot off the brake). Cycle your trip reset knob until it reads ODO. Turn the ignition back off. Wait a couple of seconds.
2) Make sure seat belt is not fastened
3) Turn the ignition back on, do not start the car (Leave you foot off the break) As soon as you see everything light up, press and hold the trip reset knob and do a long 12 second count.
4) Keep your finger on the trip reset knob. Fasten your seat belt, as soon as you fasten your seat belt, you should see the ODO display go from XXXX miles to "b-on". At that time take your finger off the trip reset knob and press it again. It should cycle to "b-off". You should be all set and turn the ignition off and unfasten your seat belt.


SWEET!!

[piercedtiger]

Originally Posted by kristopherl

Can't remember... did you get the ones with the remotes?

Yes! Two remotes. Which is 1 more than the first kit I found for around $89 so I went with the vminnovations' kit. Cheaper and 2 remotes! So I have one on my key, and one on the spare "valet" key in case something happens.

[kristopherl]

Originally Posted by piercedtiger

Yes! Two remotes. Which is 1 more than the first kit I found for around $89 so I went with the vminnovations' kit. Cheaper and 2 remotes! So I have one on my key, and one on the spare "valet" key in case something happens.

Cool! thanks for the info. AGAIN great Thread!!

[Johnson8537]

Originally Posted by kristopherl

Cool! thanks for the info. AGAIN great Thread!!

Can't belive that no one has posted this yet... especially with all the tailgate stuff. anyway I had one on my last truck and plan on getting one soon for the tacoma...

EZ-Down... 69.99

http://www.ezdown.com/home.php


I tried to email the company to see if we could get a group buy rate (wholesale price.) but the email came back... I will do more work if there is any interest?

anyone want to try to get a group buy going???

[piercedtiger]

Originally Posted by Johnson8537

Can't belive that no one has posted this yet... especially with all the tailgate stuff. anyway I had one on my last truck and plan on getting one soon for the tacoma...

EZ-Down... 69.99

http://www.ezdown.com/home.php


I tried to email the company to see if we could get a group buy rate (wholesale price.) but the email came back... I will do more work if there is any interest?

anyone want to try to get a group buy going???

Honestly, I had forgotten about it. But then, it was posted on TN, several people bought it, and it didn't work for everyone. As in, it worked perfectly fine for some people, and others it jammed/rubbed/had to be modified to work. I don't feel comfortable recommending it.

Edit:EZDown tailgate strut available for '05+ Tacomas - Toyota Forums :: Toyota Nation

Negative posts start around #55 as people actually get it installed and see how it really works.

[JKarp]

Originally Posted by dsds

How much are you willing to pay for me to tell you the code that turns the seat belt chime off?

You sir, are a frigging SAINT!!!!!!!!!!!!

[piercedtiger]

Just added a table of contents to my first post to make it easier for people to skip to the mod(s) they want to do.

[piercedtiger]

The front breather is up under the hood next to the battery so it won't suck water into the front differential and transfer case. Where is the rear one? Still on the pumpkin....

This mod moves it to higher ground so if you do water crossings you're less likely to suck water into the differential and ruin the oil.

Parts needed:

• Breather Plug (part #90930-03136)
• Union fitting (part #90404-51319)
• Around 6ft of house (fuel line works well, I got some white plastic hose from a home improvement store very cheap)
• 2 hose clamps
• zip ties

The breather and union can be ordered from any dealership's parts department, and will cost <$6 IIRC.

Jackson's Rear Diff Breather

Good video explaining why this should be done:
Diff Breathers for 4x4

[piercedtiger]

This mod makes the map lights come on with you dome light and fade out the same way. It only requires a little bit of wire, shrink tube, crimp connectors and a diode.

Toyota Forums :: Toyota Nation - View Single Post - Double Cab Map Light mod (New Method)

Since TN can't seem to go 30 days without going off line, here's another link.

http://www.customtacos.com/forum/showthread.php?t=95608

[dsds]

I read in a forum to drill holes in the ends of the bed rails and put in bolts to keep your tie downs from being taken.

One that's taken for granted now is the tailgate hose clamp mod. That's a great one.

Oh, and another is dropping in a dowel cut to length to keep the back window from being opened.

Happy New Year!!

[piercedtiger]

Originally Posted by dsds

I read in a forum to drill holes in the ends of the bed rails and put in bolts to keep your tie downs from being taken.

One that's taken for granted now is the tailgate hose clamp mod. That's a great one.

Oh, and another is dropping in a dowel cut to length to keep the back window from being opened.

Happy New Year!!

How does that save the plastic cleats from being stolen? I never slide mine out the end of the track.... You just twist the knob enough to pull them out and rotate 90* and they come out. How else out you get them on the front rail?

[dsds]

Originally Posted by piercedtiger

How does that s