2 to 4x4

OKay i had a random ? over here. HoW hard would it be to turn my truck into 4x4. Do you think i would be able to go to pick a part and just rip apart a 4x4 yota? MY gf and i have a bet so instead of just being the guy i should be and just saying okay honey yes honey i need to find out some facts. LOL.

 

^ talked about many many many times

 

yes

 

is your truck a prerunner?? if so i think it shouldn't be to difficult. not sure if they run the same tranny as a 4x4 but if so then i would think you'd have to remove the tail housing off the tranny, bolt on tcase. then bolt in the front axle, change out the hubs and add the cv axles, drive shafts. the tricky part would be all the wiring for the ADD and the tcase... not sure if they prewire a prerunner with all that stuff and just leave out the actual switches/boxes or if you'd have to run all the wiring.

 

if you have a 1st gen you can put an atlas 2 speed manual transfer case in pretty easily...long as its a prerunner, that way you can bypass all the electronics.

 

ohh and by the way... since you posted this in the 2nd gen section i'm gonna assume you have a 2nd gen. i have a tcase i can sell you if you decide to do it......

 

I'd sell the truck and just get a 4x4. Much easier in the long run

 

Thanks for all your help, ill go find all the threads and read up about everything, yes its an 06 prerunner.