OME 886 lift installed

MRAPRIDER · 03-16-2008, 07:18 PM

Newbie here that just installed OME lift.

I have been reading all of the dicussions about OME 885 and 886's and I thought I would give my input of my install today.

I purchased the OME 886 kit from toytec along with the OME nitro front and rear shocks along with an add a leaf.

install went smoothly...

my lift numbers from the ground to the base/bottom of the fender

prelift

LF: 34.25
RF: 34.53
LR: 36.1
RR: 36.5

postlift

LF: 36.3
RF: 36.72
LR: 38
RR: 38.77

It seems I got about 2 inches give or take all around with the 886's and no spacers. I was a little disapointed because I thought I would get a little more. But let me tell you the truck rides like a dream. Not too stiff at all. I kinda wish the front was even a tad stiffer to match the rear stiffness.
I may even add the top plate spacers in just for the extra half an inch. THe cvs are fine and the truck drives amazing!!!! no vibs or shakes... I love it

rhoppas · 03-16-2008, 07:31 PM

Sounds great. Congratulations. You should post some pictures.

03-16-2008, 07:18 PM	#1
MRAPRIDER Junior Member Joined: Dec 2007, #3728 Posts: 17 07 TACO DBLCAB TRD OFF ROAD 2007 Double Cab Manual	OME 886 lift installed Newbie here that just installed OME lift. I have been reading all of the dicussions about OME 885 and 886's and I thought I would give my input of my install today. I purchased the OME 886 kit from toytec along with the OME nitro front and rear shocks along with an add a leaf. install went smoothly... my lift numbers from the ground to the base/bottom of the fender prelift LF: 34.25 RF: 34.53 LR: 36.1 RR: 36.5 postlift LF: 36.3 RF: 36.72 LR: 38 RR: 38.77 It seems I got about 2 inches give or take all around with the 886's and no spacers. I was a little disapointed because I thought I would get a little more. But let me tell you the truck rides like a dream. Not too stiff at all. I kinda wish the front was even a tad stiffer to match the rear stiffness. I may even add the top plate spacers in just for the extra half an inch. THe cvs are fine and the truck drives amazing!!!! no vibs or shakes... I love it __________________ 2007 toyota tacoma dbcab full OME lift with 886 coils 255/85R16 maxxis bighorns

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Help, bad vibration after 3" ToyTec OME lift	Ga2000TacoOwner	Suspension	21	11-06-2008 12:23 AM
6" procomp lift, who installed it themselves?	allrsdup	Suspension	10	04-09-2008 08:03 PM
JUST INSTALLED 3"TOYTEC OME 884's	Toycoma06	Suspension	1	02-19-2008 01:33 PM
3" OME 885 lift with AAL's	GTECH1	Buy / Sell / Trade	2	12-09-2007 03:10 PM
Just Installed Hi Lift	CornDog	2nd Gen. Tacomas	1	10-29-2007 09:46 AM

03-16-2008, 07:31 PM	#2
rhoppas Northern Alliance Ally Joined: Aug 2007, #2564 Location: Topeka, KS Gender: Male Posts: 883 07 Double Cab V6 TRD Sport Tow 2007 Double Cab Automatic V6 Viper alarm, Hunter4x4 Bull Bar, 6" Pro Comp Off-Road lights, extra set of bed D-rings, Chrome exhaust tip, Metra Ipod/MP3 adapter, Garmin GPS, CarriageWorks grill, Maglite mounted to driver seat, 9" Stubbie Antenna, WeatherTech floor liners	Sounds great. Congratulations. You should post some pictures.