Cant locate my coolant drain plugs on the engine..anyone help me here?

wont the block drain simply by disconnecting the lower radiator hose?

 

No

 

Glad that got resolved.

 

^^^^
This

 

Can I burp the air out using one of those no spill funnels that hooks up to a radiator cap? Do they make on that fits tacoma? thanks

 

The Lisle Funnel shown in post #26 works well. If that doesn't fit your budget, elevate the front of the vehicle as high as it will go and idle engine - blip the throttle. If you have no way of elevating the front of the truck, remove radiator cap and fit an old thick sock around radiator fill. You don't stuff the sock into the fill, you fit it around the fill like you were attaching a skull cap. Now idle engine. Once it starts to warm up, blip the throttle a few times, wait a bit and repeat. The sock is to help keep coolant from flying all over the place. I've burped dozens of vehicles using the old sock method.

 

10 mm socket for the block drains.

Driver side 1GR-FE block coolant drain plug.



Passenger side 1GR-FE block coolant drain plug.

 

Only took 6 years for a picture...lol.