Getting ready to start my satoshi few questions

So i am ordering the mesh right now and planning out doing my satoshi next weekend. I was just wondering how most people attach the mesh to the grill? Also any other things i should really keep in mind while doing this?

 

dont do it

 

Here's a write up looks like you need to find some ziptie mount. Getting ready to do my grill too.

http://www.tacomaworld.com/forum/2nd-gen-tacomas/28831-my-satoshi-grill-write-up.html


http://www.fastener.averydennison.com/sub.aspx?id=598

 

i used some small bolts and cut of the head of the bolt and jb welded it on to the grill ill try and take pictures tomrrow so u can get an idea but the zip tie method would be easier

 

I epoxied L brackets on and bolted right to those.

 

most are using zip ties I believe...... good luck with ur project

 

Ok thanks for the info guys

 

is using that adhesive mount a bad idea?

 

I also used small L brackets and epoxied them to the grill. Then just got se bolts and it has worked great.
I got the brackets at Lowes in the picture hanging/screw section.