1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

5100 and toytec 1/4" spacer question

Discussion in '2nd Gen. Tacomas (2005-2015)' started by SpaceMonkey, May 2, 2010.

  1. May 2, 2010 at 8:52 PM
    #1
    SpaceMonkey

    SpaceMonkey [OP] Well-Known Member

    Joined:
    Apr 12, 2009
    Member:
    #15886
    Messages:
    600
    Gender:
    Male
    Houston, Tx
    Vehicle:
    06 PreRunner
    I installed my toytec spacer on the driver side. I know that it goes on top of the spring/shock assembly but is there enough thread to secure the nuts up top? I torqued mine down and you can a bit of the bolt sticking out but I wanted to make sure it was ok to run it like this. Thanks.
     
  2. May 2, 2010 at 9:14 PM
    #2
    wolfeye

    wolfeye Well-Known Member

    Joined:
    Mar 6, 2010
    Member:
    #32693
    Messages:
    69
    So 5100's and 1/4th top plate spacer. Are you running a new spring with your set up and what height do you have them set at?

    Bump for you
     
  3. May 2, 2010 at 10:01 PM
    #3
    eight3one_offroad

    eight3one_offroad Honey your two French Fries short of a Happy Meal.

    Joined:
    Dec 8, 2009
    Member:
    #27261
    Messages:
    740
    Gender:
    Male
    First Name:
    Richard
    Santa Cruz, California
    Vehicle:
    TRD Sport 4x4 with a few things.
    Optima Red Top 34R, OME 885 / N140S + 5100 rear, TSB leaf pack, Camburg Ball Joint UCA, Wheelers Diff drop, AEM Brute Force Intake with filter wrap, Summit Super Turbo muffler, Llumar 5% tint, Pioneer single din head unit, PIAA 510 Ion Crystal Fogs in stock location, Sonar LED tails. Sway Bar removal. Charcoal filter delete. Stant 11509 Locking Gas Cap.
    I have 5100s and got the 1/4 top plate spacer installed on drivers side with no problems. You'll be fine and don't need longer studs...

    - Richard
     
  4. May 3, 2010 at 4:37 AM
    #4
    SpaceMonkey

    SpaceMonkey [OP] Well-Known Member

    Joined:
    Apr 12, 2009
    Member:
    #15886
    Messages:
    600
    Gender:
    Male
    Houston, Tx
    Vehicle:
    06 PreRunner
    Springs are TRD SPort. 5100 set at 1.75". Thanks Richard!
     

Products Discussed in

To Top