Tacoma World Forums

Tacoma World Forums (http://www.tacomaworld.com/forum/)
-   2nd Gen. Tacomas (http://www.tacomaworld.com/forum/2nd-gen-tacomas/)
-   -   SAT ready JBL Radio (http://www.tacomaworld.com/forum/2nd-gen-tacomas/131563-sat-ready-jbl-radio.html)

bkfarrell 01-02-2011 02:17 PM

SAT ready JBL Radio
 
1 Attachment(s)
I have a 2008 DC that I put an OEM JBL SAT ready HU in(pulled my stock since it wasn't SAT ready).

This unit has multiple connectors on the back and I have no clue as to what they are. Anyone familiar with the A51864 unit? I'm curios as to what these connections will do.

Thanks for the help.

Frogdaddy 01-02-2011 04:38 PM

Blue one looks like the same plug for sat antenna cable in my drivers side kick panel.
Not sure about the rest.

doubletaco 01-02-2011 04:41 PM

I might be wrong but most JBL radio's have a seperate amp, as far at the sat you have to have the XM receiver to make it work.

Frogdaddy 01-02-2011 04:51 PM

So the JBL unit doesn't have the receiver built in? Which is why I thought that blue plug looks awfully familiar to what I just connected to on the kick panel for my external pioneer xm receiver.

doubletaco 01-02-2011 05:23 PM

Like I said not 100% sure on it but that blue plug does look like the sat antenna plug. So do you have the JBL radio?

bkfarrell 01-03-2011 12:07 PM

The one main thing that I would like to figure out is where my steering weel controls plug into. I cut the connector off a while back when installing a different unit, thinking I would never need to put the original back in. Well, hell, here I go now putting the original back in. I just don't know which plug I need to fabricate the connection too????

Anyone??


All times are GMT -7. The time now is 12:12 AM.