OME trim packer?

can someone tell me the scoop on what this is and its purpose.

 

It sits under the spring perch to give you a little bit extra lift with OME front shocks. generally used on the drive side only to counter the effects of the taco lean.

 

ah i see.. why does she lean?

 

Battery , gas tank , driver all on the same side

 

The driver" battery, and gas tank are all on the left side of the truck so they lean that way in most cases.

 

ohh. thanks doods.

 

it will look like this.

 

cool thanks

 

wanted to bring this back to life for a quick sec

so can anyone input on this would be passenger side..

and driver side..

 

So do you currently have the trim packer installed? If not your lean is about normal. My 05 was a about 1 1/4" lower on the driver's side. My 06 was about 1/2" lower.

 

yeah i dont have it yet. so the trim packer will raise me an inch?

 

About 1/2"

 

can i put two rings?

 

I don't see why not

 

has it been done before?

 

I can't speak for the trimpacker, but I do know for sure that some people have used 2 Toytec 1/4" top plate spacers or 1 Toytec 1/2" top plate spacer to level theirs out. It's the same concept. It just goes on top of the strut instead of under the spring perch.