Uninstalling URD MAF

Hey,
So I want to uninstall the URD MAF. I Had someone else install it (Wolfpack_5150) and now I want to uninstall it.
If someone could point me in the right direction that'd be awesome. Seems like it'd just involve soldering and matching wires. But like i said i didn't install it so not sure how to remove it. Thanks

 

clip the wires off. done. The MAF CAL wires just splice into the yota wiring harness. just cut the wires from the maf cal as close as you can to where they attach to the factory harness and you should be fine.

 

o cool thanks man!

 

Hmm.... Not sure how the Tacoma is wired, but the PSC controller (MAF) usually splits one of the factory wires, so unless you tie it back together, it ain't gonna run.

Tacoma could certainly be different though. I just remember cutting one out of my car, and having to re-connect one of the wires out of the ECM.

 

That's what I thought... Ill check

 

Call urd bruh

 

gadgets a busy guy, hard to get a hold of

 

thanks man, guess ill just go in reverse order

 

Yep. Same as my car. Step E & F separates one wire. You need to re-solder that wire back together. The others can just be cut from the PSC.