The 2.7L Single Cab Thread

Mine is a manual as well, it seemed to take as long to add the clutch switch as it does to hook up everything else! I was NOT working very hard at it and the whole thing took about 4 hours I would guess.

The cruise actually works very well in this truck, you'll love it. I got the clutch switch from the same ebay seller as everything else and it came with the required wiring for $26 I believe.

 

lol, this never happens.

 

I have had these retrofits for a couple months now and just got my first glimpse at the demon eye...
.

 

Dougj. Was anything pre wired or is it a complete install of everything? Thanks again. I just want to make sure I know what I'm up against when I do this.

 

That ebay seller has the most simple instructions possible right on his auction page on how to check for any pre-wiring on your truck. Mine didn't have it. It did have the two pin connector there for the clutch switch, but the wiring did not go all the way to ECU. I spent the time required to pull the whole center instrument cluster/radio so I could run the wires behind there neatly ty-wrapped. Simple stuff really, just read the instructions ahead of time and make sure you have the few basic tools required. Take care verifying what you are plugging into at the ECU connector, as there are a bunch on empty pin locations. The instructions will shown the face side of the connector and clearly indicate the proper location.

The only thing not present in the stuff I bought was the T-tap connector for the clutch switch...

 

Dougj.
Thanks for taking the time to answer me. Your help is greatly appreciated. I will more than likely do this. Thanks Again.

 

I guess I'll finally post a pic of my truck

 

That is what mine is going to look like this summer! @LOUMO

 

@GingerJoe nice, I am currently getting my topper painted and when I bought the wheels I got 5 so I am gonna start on a DIY rear bumper with tire carrier. I'll post a pic of the topper on this weekend

 

I've wanted a topper forever and will hopefully someday do a DIY rear bumper, your truck is sweet. @LOUMO

 

@GingerJoe thanks man, me and this truck have been through a lot together, it has taken me 3 years to get to this point with it. It's a love hate but now that it is looking the way I want it to I'll be keeping it for a while.

 

looks good! what coils did you go with?

 

It has a full OME kit with 885 springs and Dakar leafs in the back.

 

nice. i went with the 885's also.

 

truck looks awesome man! keep that bitch forever. i have a topper as well and it is great for storage and not having to worry about your stuff getting drenched.

 

Love it! Mine is going to look similar after I install everything this weekend.... Except a little scaled back with 884s and a 1.5 aal

 

Damn, that's a good looking truck. What size are the tires??

 

Thanks man!!!! And I plan on it

286/75/16 BFG KO2

 

Nice looking wheels ya got there...

 

What sliders are those?