how do u remove fog lights on gen 2

Im going to install lamanex on my fogs but i cant figure out how to take off my fog lights can anyone help

 

The adjuster screw on the bottom has 2 tabs on it that hold it in place, push those in while pushing the fog light housing from the rear (push the fog light toward the front of the truck). Once that releases, there are 2 alignment tabs, one on either side of the fog light housing about 1/2 way up that can sometimes get stuck on the holes in the bumper. Just wiggle it a little and they'll pop out.
Here's a side view of the fog light, see the alignment screw on the bottom with the black plastic piece over it? That's what is holding them in place.

Back view so you can see the tabs that stick out either side that can get caught and hold the light in place.

 

This doesnt work????

 

Thnk bro

 

Hahah

 

Ask jgwheeler, a BFH is his first choice for most repairs

 

what pugga wugga said

but id think twice, look at all the rum he has in the background...

 

The rum is only for the projector retrofit, not required for lamin-x install

 

Why the fuck is this do difficult they wont come off

 

please see post #3......

JK JK JK... you have your bumpers off?? try using a small flat head screw driver to help you press those little clips.

 

See the attachment. Press the tabs (see the arrows) and then that should release the adjustment screw from the bumper. Then pop the sides out of their holders (see the clouded area and the nubs sticking out). These nubs seat into holes on the bumper and can hold the fog light in place. Don't forget to unplug the bulbs

 

Oh yeah, and once you have them out...
http://www.tacomaworld.com/forum/lighting/187831-fog-light-retrofit.html

 

Im trying to push those tabs in but its a no go

 

Push in the tabs and push the alignment screw portion out of the hole in the bumper, then turn your attention to the side tabs. Once the bottom alignment screw is not held into the bumper, twist the light so it pops out. Keep them plugged in at first, they tend to release with a little pressure, that way you won't send the light flying.

 

Do i have to tKe off the bumper

 

No, I got mine off in about 30 seconds just by laying on my back under the front of the truck. You absolutely do not need to remove the bumper.

 

I am pushing those tabs still a no go.....

 

I don't really know what to tell ya man... All I did was push the tabs in, pop that part out of the hole in the bumper, then push from the back of the fog light and the whole light popped out. Those tabs are the only things really holding the light in place.

 

Nvmd i got them out thnks man!!!! Now i wanna retro fit lol lamenex for now

 

If you want to retrofit, there is an easier way than the thread I listed. It can be as easy and just drilling a hole in the back and epoxying the projectors in place. I went overboard with the paint and shrouds.

http://www.tacomaworld.com/forum/lighting/171829-blazer-fogs-factory-fog-housing.html