Searched. No luck. 33s stock prerunner?

planning on getting a stock early 2000 prerunner. would 33s be able to fit on a stock prerunner with no rubbing? no off roading.

if not, how much of a lift re we talking to fit them?

maybe spacers are an option to not lift?

http://imageshack.us/photo/my-images/82/dsc0005smpm0.jpg/sr=1

kinda looking for a beefier or wider stance than that but i guess thats alright.

feel free to post any other options.

 

negative. MAYBE 32's with triming

 

what about a body lift?

 

the general opinion of those are not good. they do damage.
you could get 32's and do a 2inch lift without rubbing or spacers needed

 

any specific reasons why?

 

Looks just awful.

And I was in a 94 Toyota pickup with a body lift when one of the bolts sheared and shot the body lift out 10 feet to the side of the truck, and the cab fell onto the frame.

 

they say a picture is worth a thousand words

 

ok well body lifts are now out of my options lol.

how much would a 2 inch lift run me?

 

depends on what type. a spacer lift is around 150-200 bucks. the bilstein 5100s are about the same for just the front. I have the bilstein 5100's and i love them

 

read up on it
http://www.tacomaworld.com/forum/suspension/11282-tacoma-lift-faq-guide-read.html

 

what about 32s and tire spacers?

 

cant say for sure. maybe
Edit: do you not want to do a suspension lift or something?

 

well trying to keep as close to stock height but biggest tires. and trying not to spend a fortune. just a teen lol.

edit: and i do like the wide stance.

 

maybe stick with 31s and some spacers? I love the stance on my truck. i dont have wheel spacers, just wider tires. here is my build http://www.tacomaworld.com/forum/1st-gen-builds/196967-tacomabosss-build.html

 

Wait what?

 

i think he just want a lift for looks

 

You can fit them with virtually no rubbing on the street stock (not being offroaded). However you will need to trim the front fenders a bit cut off some a the firewall and depending on how your rear is set up you may have to trim the forward section on the beds fenders. If you did however take a dirt road you would rub like a bastard trying to turn if its flexing out at all.

 

freaking sweet. thats probably pretty close to what im looking for.what size tires are you running?

and ya mainly for looks. not too many places to go offroad in south florida.

 

i have 32x11.5