Icon Coilover 2.5 Part Help Needed

I was looking at the the Icon 5 lug 2.5 Coilover; at the top of the shock body there is an eylet, with a bolt going through it that connects it to the top hat portion of the shock. (right above the super shiny part because of the flash)

im assuming then, that the bolt connects that with the top hat, with another eylet. This is the part I am looking for. This top hat, with an eylet through it.

is there any way someone could measure those? or does anyone have dimensions or where i can look to find dimensions on this? and if there's any way to buy just that portion of the coilover.

mahalos

 

I think what you are talking about is actually part of the TC UCA kit. It's a round adapter plate that mounts to the factory coilover bucket. It allows you to mount the aftermarket icon or saw coilover into the bucket.

What I'm referring to two round disks in the picture below. I've got the TC UCA kit but haven't installed it. I can try to take some measurements or pictures for you but I don't have any calipers to be able to take exact measurements.

 

yup that's exactly what i need. the main measurements i need are the size (thread if possible) of the bolt and the distance between the two sides.

i'm trying to see if other coilovers (not for a lifted application) with the same style top mounting point would work.

so TC would be the one to contact to buy that specific part? do you think they would just sell that specific part? i might try and contact them too and see if I can get any specs

 

The bolt that goes through the coilover eyelet is 1/2" x 2.5". Not sure on the thread pitch (fine/coarse). I'll measure the spacing between the holes later on tonight.

 

Here's a pic showing the measurement between the tabs where the coilover mounts. It measures 1 1/4". Also notice that the 1/2" bolt is a shoulder bolt so that it fits very well in the hole.

 

thanks, that helped out a ton!

 

No problem man, let me know if you need any other pics.

 

Do you happen to know the distance between each of the 3 mounting bolts? Thanks!