Hello everyone. I am new to Tacomaworld and wanted to thank everyone and the awesome information you can get here. I had the high idle problem when my engine warmed up. I don't have an RPM gauge but man you could hear it idling high. I am guessing over 1500 rpm's. After researching through the forums I decided it must be the Idle Air Control valve (IAC). When I took off the throttle body I noticed a lot of carbon build up. I took off the IAC and sure enough it had some serious build up and the valve didn't turn. So I took some brake cleaner a scribe and some q-tips and cleaned it out. After a thorough cleaning it turned with ease. Put it all back together and bam. Just like that it was fixed. It runs better than when I got it. Again you guys saved me lots of money. Thank you so much. If anyone needs any info on this just ask. It took me about 1.5 hours to complete not bad at all. Only thing is be very careful of the brass screws. I had to replace mine. I put hex heads on as a replacement.
Now my question I how to prevent the build up in my throttle body. Below is a pic of my throttle body. I don't want to have to do this again.