AZ LED Gauge swap

Local Only - I Supply LED's

$80 -Gauges
$15 -Steering Wheel Controls/Per Side
$10 -Switches/Per Switch

I can do all four guages and needles in any color theme.
Also, warnings, caution lights, blinker arrows, ect.

Any questions please PM or Text (480) 528-6088






Here is my Taco and wifes 4-Runner.





Jonesn13's





BMOC



Aw9d



Window switch, Buttons & steering wheel controls



Rav4 Guages



1st Gen - Tacomagirl64

 

Looks like in your picks you have some LEDs out.

Good luck to ya. I was doing this in SA for awhile. Good cheep mod to do.

 

Not exactly sure what your seeing, but maybe Ill have to try and take some better pictures.

 

Looks like the tacks for fuel and temp are not lit up on the Tacoma. Blue back ground. If one is not working then the other won't. Just tryin to help ya out.

 

Are you talking about the needles?

 

I believe he is. The needle for the tac is not as bright as the speedometer, and the gas and temp look very dim almost inop on your tacoma vs your wifes 4runner.

 

Yes the needles are out on the Tacoma.

 

Probably because the speedo needle I did 2 white and 1 blue. The tach 1 green and 1 blue, and fuel and temp 1 green each. I also didnt paint the backs of the needles, I was just experimenting. Plus the camera didnt get it very well. But I assure you that there is no burnt LED's.

Also, this morning I changed all the needles to pure white and painted them, just to cure any doubt about whether or not I can tell if a LED looks "inop" or "out" and took another picture. Sucks cause I kinda liked the green.

 

Aaawell didn't know you put green for the needles on that side. Green with the red needles maybe why.

There are a lot of guys in AZ and I'm sure plenty will want this done.

Good luck OP

 

What did you paint them with?

And why did you have to paint them?

 

The backside of the stock needles are originally painted red, I used nail polish remover to take the red off and paint the backside white. It helps the color and light of the LED reflect brighter. I used white acrylic from a local RC hobby shop.

 

awesome! thanks for the tip.. I'm still debating if I want to tackle this myself or not.

 

I want to do this.. but the thing is.. there's still a lot of orange lighting in our trucks. I want them ALL the same color. So I may stick to orange. My deck can change colors so everything matches already..

Looks sweet tho! I would want everything white.. with red needles.

Good luck OP! People.. jump on this. $50 is cheap!

 

^^^^^^
What he said...
ALL the same color white with red needles. Post some more pics when you do more. Nice to see someone in AZ doing these.

 

I'll be back in Tempe in a couple weeks. I'm for sure hitting you up to get this done

 

Im already looking in to doing all the accessory and option lighting such as the radio, steering wheel controls, clock and power windows and locks. Ill update OP when it happens.

 

Sounds good :thumbup:

 

i will probably have you do this for me. i am heading up to flagstaff for college and i will probably see if i can stop by on my way up there. if not this trip up. i will get to you sometime. and you can do 1st gens right?

 

lemme know how u do the buttons and everything. i did my gauges and radio all blue and white. just waiting to do the hvac stuff and steering controls
its an easy mod

 

Sweeet.. keep us posted then. Cuz I will DEFINITELY have this done then.