TRD Tundra & Bilstein Tundra 5100 Lift

I have my TRD Tundra (y/y, y/b) coils and Bilstein Tundra 5100 shocks. This is a complete setup and is set on the second perch. It yielded roughly 2.5" of lift for me and rode great. Only reason I changed was I wanted more lift and got a great deal on some SAW 2.0's. The shocks are 8 months old (8-10k) and the coils have about 75,000 on them.

These will work with 1st gens. I have swapped the 4runner/Taco top plate for the Tundra top plate and it bolts right up. It's not as popular of a lift here, but very popular at T4R and the front set up of the Sonoran Steel 1.2 kit.

$300 + shipping and located in Santa Cruz. (Local pick up preferred)

SOLD

 

Will the bolt pattern on top of these match the bolt pattern in the coil bucket on 1st gen Tacos? I remember them being slightly different??

 

Yes I swapped the 4runner/taco top plates for the Tundra top plates. It will bolt right up.

 

Right on...cool swap

 

Yeah it worked great, but didn't have the adjustability I was looking for. Just for reference TRD Tundra coils are 595 lb and progressive. The Tundra 5100's also have 5 perches compared to the 3 on Taco 5100's.

 

You still have these?

 

Sorry I don't. I will update the first post to reflect they are sold.