FS Fabtech Coilovers and top plates

Hello everybody I have a pair of old Fabtech coilovers and top plates that I want to sell they are in decent condition and funtion normally. NO struts will come with them, the original ones were broken in half from neglect (previous owner). Fit first gen tacomas 4x4. With strut these are capable of 3.5in of lift.

I prefer local buyer but I am willing to ship on buyers dime.
Located in Cedar Hills Utah
$30 plus shipping

 

Whats the spring rate on these? How much lift with 4x4 and bilsteins?

 

I believe they are 600lb spring rate and are you talking about the OEM bilsteins? cause if so you will end up with a 4-5in lift and you WILL NEED a diff drop kit which is like $20. Originally with the fox strut these gave a 3.5in lift with out a diff drop but since you cant adjust the OEM strut it will increase the height.

 

Also probably wouldnt want to use these on stock UCA's because you wouldnt be able to get it into alignment. Seems like a good price though! GLWS!

 

Yeah I agree with austinramsay, if you were to pick up some aftermarket UCAs and a diff drop kit you would have a pretty sick custom lift for about half the cost.

 

I'll take these off your hands, sending a PM.

 

sale pending to zadeer

 

SOLD thanks for the interest everybody