x940 bt

Thinking of pulling the trigger on this, I have a 2012 Sport with JBL, and looking to replace everything, a few questions:

Can i Keep the factory backup camera and bluetooth mic?

What other accessories will I need, like wiring harness, steering wheel controls harness, etc. Would like to keep the same functions I have now, or close to it as possible.

 

You'll need the JBL wiring harness, a wiring harness to keep your back up cam and mic, and a harness to keep your steering wheel stuff if you have it. Crutchfield will has part numbers

 

follow up question: do i need the jbl wiring harness if i'm running new speaker wire too? I'll have a new amp, new sub, and wiring, and looking to take out all the jbl items....and is there a harness to keep the camera and mic?

 

I have the same stereo you are asking. It just arrived yesterday. Waiting for the metra and wiring harness. I have the non jbl.

Don't really care for the steering wheel controls.

 

If you're running aftermarket amp you won't need to hook up your JBL amp, you'll just need to connect the power, grounds, and other wires from the back and just keep the speaker wires unhooked and run RCA's out the back of the unit to the amp.
Here's your steering wheel interface:http://www.crutchfield.com/p_120ASWC/Axxess-ASWC.html?tp=3405

I'm trying to find an interface that will allow the stock bluetooth to work. I think you may be able to unhook it from the back of the stock radio and just switch it with the new one as all of the BT mic's I've installed have had a 3.5mm jack that was used to interface the mic with the radio's.

 

Thanks War horse....any idea on the back up camera? Most of these HU's have an RCA composit input, but i guess without tearing out the stock unit, I don't know if the stock uses RCA>...

 

if you are ok with saudering you can cut an rca strip back and sauder to these wires for the factory backup camera! I will be doing this, this weekend and let you know how it goes!