Pics of different lift heights

I was just out messing with the truck today and decided to take pics of stock, 1",2", and 3" lift heights and stock 3 leaf rear end. feel free to add your lifted pics. the reason I did this is to try and decide if I want to got with .85 or 1.75 on the 5100 if when I get them

Stock height


1" of front lift


2" of front lift


3" of front lift

 

Thanks for doing that. I'm also considering the 5100 @ 0.85

Edwin

 

Thanks for this, 0.85-1'' looks about level Might go with that

 

3"

 

2.5" in the front and 1.5" in the rear.

 

Do you have the TSB along with the 1.5" AAL, or just the 1.5" AAL?

 

a little over 3 up front and 4 in the back

 

snowsk8air2: hey bro, could you do some measurements of your front and rear? i would like to see what kind of numbers you are getting with that set up. thanks in advance.

 

sure. where you want me to measure from? I don't remember what the stock height to anywhere was, just know when I installed the lift I was just under 3" up front and a little over 4" out back, but I've cranked on the preload adjusters up front to get it to somewhere between 3 and 3.5. but like I said, that was a little while ago, so let me know where you want me to measure to and from and I'll get back to you tomorrow. Also have 33" tires so that added another inch all around

 

ground to fender. some people like the whole center of the hub to fender measurement but i rather have the ground to fender, only cause thats the number i use LOL. i have icon extended travel 3.5 up front and the icon 2.5 rear shocks w/aal in rear, and it looks like your sits a tad higher than mines. debating on cranking my coils up a bit more.

fronts: 38 1/4"
rears: 39 1/4"
tires : 265/70/17 (4runner trails)

 

I don't have the TSB. I have a Toytec 1.5" AAL.

 

front: 39 1/4"
rear: 41"
tires: 285/75/16 duratracs

and I imagine I'll be cranking on the preload more once I finish this

 

very nice and good job on the bumper too. with the tires it taken into account, it looks like it gives a tad over 1/2" of lift over my tire setup. which is nice cause thats the series i was looking at getting once i get new wheels. thanks man, appreciate it.

 

Nice. Yeah, love the tires and they're the perfect size. I want to upgrade my suspension again when I can afford it. Something with remote resis all around and proper uca's.

 

http://www.tacomaworld.com/forum/su...essive-aal-before-after-pics.html#post6458645

 

what wheels are thoes???