What size block for NON-Leaf TSB with 5100's?

I am thinking of setting my 5100's at 1.75" up front. In the rear, since I do not have a leaf spring TSB nor do I want to spend the $$ on getting a set, I am going to add a block to the back.

My biggest fear is having my front end higher than my back end.

Everyone on here seems to have the rear leaf tsb, but I do not. I have a 2006 Sport 2WD extra cab radiant red beauty. Hope this can help out everyone else who doesn't have the free leaf TSB.

My questions is: Will a 1" Ready lift block level out the back? or because I don't have the extra leaf will I need a larger block?

 

1". I had that with 5100s at 1.75 and it was level.

 

I'm 06 Prerunner btw

 

I would go with a 1.5 and reason I say this is the 1.5 block has a taper where as the 1" block doesn't. Helps a lil on your driveshaft angle to eliminate any vibes.

 

You guys are awesome. Thank you so much!

 

I never had any vibes at all with a 1", but I know all tacomas are different. Good luck OP.

 

Like dis? \/



Or dis \/