Strut Mount Questions

So i have all my parts sitting in boxes except the Strut mounts, i want to pull out the old and just throw in the new. I have a guy who can compress the springs and install the mounts for me(OME 885 and Bilsteins) but the ordering the parts is confusing to me.

I have 2 parts numbers:

KYB Part # SM5640
http://www.rockauto.com/getimage/ge...l=http://www.rockauto.com/info/KYB/sm5640.jpg

and
MONROE Part # 907921
http://www.rockauto.com/getimage/ge...ttp://www.rockauto.com/info/Monroe/907921.jpg

the look simular but are not priced accordingly and theres another Monroe listed for 13 dollars.
http://www.rockauto.com/getimage/ge...ttp://www.rockauto.com/info/Monroe/907927.jpg

and toyota only shows the part simular to the KYB mount, which comes with no bolts
So which one?

 

these are the struts and springs

 

so no ones ordered top strut mounts that can help a brother out???

I guess I'll order the KYB's tonight and find out for my self.

 

We have the Top-Plates available. $48.00 Each. You will also need the Coil Isolators they are $11.00 Each.

 

You most likely won't need to replace the mounts unless they are in really poor condition like very rusty or corroded. you can use the same mounts just replace the rubber bushing # 22 in the Toyota diagram. The mounts in my 2005 TRUCK were still in good condition to use one more interval so I know they should be good in a 2010 Tacoma unless you been driving in salty roads or something. That is the rubber bushing #22 with the red arrow in the picture. just order that at toyomotorparts.com. The second picture is what I and most folks are putting in their tacomas these days, billlies 5100's
good luck man

 

just use the ones from the stock struts..

 

I'll go check it dan, thanks! You guys at wheelers have been great!

 

The main reason was to keep from having to remove,compress,uninstall mounts,compress the new,reinstall mounts,reinstall struts.

 

subd, using this info so I don't start a new thread

 

I wish I had seen this thread earlier as I went through all this research myself; I wanted to pre-assemble my new springs and shocks so it was a simple swap.
I posted in the thread linked below, page 11, post #202, listing the part numbers I used. I believe I paid $18 for the Monroes (Rock Auto) and $11 for the insulators.

http://www.tacomaworld.com/forum/2nd-gen-tacomas/197516-2nd-gen-eibach-toytec-gallery-thread-11.html

 

http://www.tacomaworld.com/forum/2n...ach-toytec-gallery-thread-11.html#post6704028

Here's a link to the direct post, thanks. I'm probably going to redo mine and ditch the bilsteins

 

reviving an old thread, does the KYB kit work? like it has all you need?

 

Yup. That's the one I have.

https://www.summitracing.com/parts/kyb-sm5640

Here's the order of parts in case you need it.