Turning signal problem

Everytime I put in a led for my headlight turning signal it blows my fuse, then I put a regular bulb back on with a new fuse and it starts working normally, what can be my problem? Also... My tire pressure light won't turn off, how do I turn it off?

 

Put in the correct bulb.
inflate tires.

 

Tire pressure light: inflate tires (don't forget the spare).
Lights: use standard lights, correct LEDs (resistance factor), or use a resistor for LED lights (can get at autozone).

 

I've inflated my tires already, but I didn't know about the spare! Thanks! And about the led, I just buy that resistor at autozone?

 

Over inflation can cause the light too, just inflate them to the correct pressure.

 

I didn't know that would cause a light. Hmm, good to know.

 

You could have dead batteries/battery at the TPMS stems. I hear they only last just over 5 years.

 

You need a CK type base on the LED bulb if you have DTRL's, otherwise you will keep blowing fuses.

 

Sometimes the TPMS light will be on if you don't have sensors or if one of the sensors is damaged.

 

Check your blinker fluid.

And fill tires with winter air.

 

I didn't know there was blinker fluid, where and how do I check it?

 

How would I know which kind of bulb I have?

 

You have 3157 dtrl bulbs. Autolumination has come style bulbs you can use

 

Are you the second or third owner?

The first owner may have had it installed as a dealer option, I'd say go check with your local dealer, see if they have any techs certified on that dealer option.

 

http://www.youtube.com/watch?v=ZxkHqPXwNZ4

The video is of a Jeep but the concept is the same.