Toytec 3" lift

New to the forums and have a 2013 Tacoma 4x4 doublecab. Looking at the 3" coil lift from ToyTech http://toyteclifts.3dcartstores.com/BEST-SELLER-3-Lift-With-front-coils-rear-options_p_233.html

Wondering what tire sizes Ill be able to run with this.

Also if at a later date I wanted to add a little more lift without going full on 6", will adding the 5100's add anything, or just improve ride quality because of longer travel ?

 

Here is the link for the suspension forum. Lots of reading here to help. Also, if you do a search for lifts, there is a ton of info already on the forum.
http://www.tacomaworld.com/forum/suspension/

3" lift you can run 265/75/16 without trouble. Any more than that and you need new upper control arms and may have to trim around the inner fender. With 3 inches of lift, you need to worry about CV angle being increased too much.
5100's are good for up to three inches of lift. Good luck with your research and truck.

Welcome to TW!