BMF Wheels (perfect fit?)

Have a look at these...

http://www.ebay.com/itm/BMF-NOVAKAN..._Car_Truck_Wheels&hash=item2334df6f69&vxp=mtr

Would these be a good fit? The bore is 106mm, so don't need centric rings and the offset is very close to my current spidertrax 1 1/2" spacer, so I could take those off too. I want to put some 275/65/R18 duratracs on them, what do you guys think?

 

I have them in 20x9 and love the look, you'll be happy. As far as the tires you could use an online calculator & type in the size and compare to the OEM size, you can go a little bigger with the right backspacing if you don't mind a little rubbing.

 

I'm running Mickey Thompson ATZ's right now in 265/70/R17's and they are only 1/2" less diameter than the duratracs that I want in a 275/65/R18. I've never had any rubbing issues, so I should be good. Only concern I had was the the bore and enough room behind the center cap.

Thanks for the reply, it makes my decision a bit easier!

 

Another thing to consider, if you bought 108MM bore with the centric caps you could always sell them to other mfg's vehicles, not just taco specific.

 

I don't think the 18's come in a 108mm bore. I plan on keeping this vehicle for awhile anyways, so selling the rims separately isn't a concern. Thanks again!

 

im running 18x9 with 285 60 18 nitto terra grapplers

 

Thats my ad lol. Shoot me a PM and I'll hook you up.

 

love those rims. post pictures after install

 

Looks like they shipped today, should have them by next week, will post pics.

 

Well they fit perfect!! No rubbing at full lock either. The only problem I had was the TPMS sensors needed to reprogrammed by the dealer. Sucks that every time I want to switch back to my old wheels I have to do this, but other than that very happy with the wheels!

 

Beautiful truck!

 

This is a good guy to deal with too. Glad you like them op.

 

Man i have never heard of these wheels but they sure do look good

 

Best thing about these wheels is they are a 106mm bore, so essentially they are hub centric, so no need to buy centric rings. I'm amazed at how good they are on the highway, they have less noise than my previous tires (mickey thompson ATZ's). Here's a close up of the wheels.....

 

truck looks good.

 

I'm looking into getting BMF wheels myself just curious what size wheel and tire you ended up getting and how well have they held up?

 

Those wheels look awesome. What lift do you have?

 

I went with 18 x 9 wheels, tires are Goodyear duratrac 275/65/R18. So far they have been awesome. The road noise is noticeable, but less than my Mickey Thompson ATZ tires, so far so good.

My lift is just a spacer up front (2 1/2") and the rear is an add a leaf. There was quite a bit of rake at first but over the last few months it has levelled off.

 

Are you running any wheel spacers? are you having any rubbing issues? Basically whats your whole setup? I was going to try BMF wheels with a billy 6112s

 

I'm not running any wheel spacers, the rims are offset similar to what a 1 1/2" spacer. I had a small amount of rubbing on the front plastic vented piece, easily fixed by trimming. I've had them over a year now, still love em!!