Advice needed for lift in front!!!

My 03 Tacoma has extra leaf springs in the rear end because we used it for a lot of heavy towing. However that's not so much the case anymore. The added leaf springs raised the rear end about 1.5-2" and I would like the front to come up so it doesn't look so tilted. Any advice on front end leveling kits?

 

This is the easiest and probably the cheapest
http://www.daystarweb.com/productdetail.php?productID=534

Or go here

toyteclifts.3dcartstores.com/Front-Lifts-Coilovers_c_185.html

Do your research before buying

 

You could take the extra leaf out...

 

I'm pretty sure they make the "Bilstein 5100" front shocks/struts for your model. Those are adjustable using the OEM(stock) coils at increments of 0", .85" 1.75", or 2.5" of lift. Or you could use those struts and Old Man Emu(OME) coils together with bilsteins at 0" setting to lift front. For first gens I think you'd want the 883 coils, but look that up first!

 

Welcome to TW, Nick! My first recommendation is for you to spend some time perusing the Suspension forum, with emphasis on the Tacoma Lift FAQ/Guide and Suspension Lift Info threads.

FWIW, I went with OME 881 coils and Bilstein 5100 shocks to achieve the proper front-end lift on my truck (following replacement of my ).

 

883 if you have weight up front like bumper and winch. If not I'd go with 881 and maybe 882's if you plan on adding stuff down the road

 

it all depends on how much you're willing to spend, what's your budget OP?

 

Alright, thanks for correcting that, I couldn't remember if it was 881 or what, now I know.

 

5100 for first gen only has 0" 1" and 2.5".

 

Thank you for the correction here too - now i can give better info next time

 

Come on guys he's a 2nd gen he doesn't know what he's talking about
Just minor differences in the type of lifts haha

 

Haha, yeah, I know specs for 2nd gen stuff, good to know both though

 

so how would you get the truck level with the adjustible 5100 and not having too much of a lift were new uca's are needed and the alignment is still good.

 

OME 883#'s on 1st gen Tundra 5100's , 5 settings....