Tacoma shift base extensions

I had a few of these made up to raise my shifter base up off the tcase. This combined with extending (cut/weld) the shifter "tang" will reduce the throw needed for shifting your transfer case. Works on Tacoma chain drive cases, single or twin stick.

I did this because I didn't want to cut up my console anymore, anymore enlarging of my holes and the lever throw wouldn't stay within my stock coin tray area I used for the shift boot.

They are cnc plasma cut from 1/4" aluminum, then the holes drilled out for the bolts. I made up four of these to "stack" until I achieved the shortened throw I wanted.

I used two so two are available.

$10 each plus $5 shipping for one or for both.

 

And sold!!!

 

Boo